FEATURES
Optimum sanding results without the need
for special operator skills.
High quality conveyor belt for long service
life.
Variable feed rate from 3-20 FPM.
Conveyor motor equipped with indepen-
dant safety switch with removable key.
Magnetic safety switch on main motor.
Side and rear extension tables for easier
stock handling.
Reinforced pressure roller brackets.
Large metal hand wheel controls sanding
head height for thickness adjustment.
Internal dust shroud for efficient dust con-
trol.
Totally enclosed stand with storage com-
partment.
Ability to sand up to 30”material in two
passes. (Finish sanding may be required)
SPECIFICATIONS
MAXIMUM SANDING WIDTH
15” (380 MM) / *30” (*IN 2 PASSES)
MIN / MAX SANDING THICKNESS
1/4” (6 MM) / 4” (102 MM)
MINIMUM SANDING LENGTH
5” (127 MM)
FEED RATE
3 TO 20 FPM - VARIABLE
SANDING BELT SIZE
15” X 39 1⁄2” (381 X 1003 MM)
CONTACT ROLLER DIAMETER
2 1⁄2” (82 MM)
OVERALL DIMENSIONS (L X W X H)
WITH TABLES FULLY EXTENDED
39” X 52” X 64 1⁄2”
(991 X 1321 X 1638 MM)
CONVEYOR MOTOR
1⁄6 HP
MAIN MOTOR
3 HP, 220 V, 1 PH, 1720 RPM
WEIGHT
400 LBS / 182 KG
SETUP & OPERATION MANUAL
MODEL
#
15-030 M1
15” OPEN TYPE WIDE BELT SANDER
REVISION 1 - September 25/08
© Copyright General® International 09/2008
Summary of Contents for 15-030 M1
Page 23: ...23 UPPER ROLLER AND COVER ASSEMBLY ...
Page 25: ...25 CONVEYOR ...
Page 27: ...27 SANDING HEAD ...
