Instruction Manual
GemOro "Sparkle Spa"
PERSONAL ULTRASONIC
CLEANER
Model SS-1780 (Stock # CL1722)
SPECIFICATIONS:
•
Bright Blue LED Illuminated Stainless Steel Tank
•
1 Pint / 600ml Capacity
•
42,000 Energy Producing Sound Waves Per
Second
•
Electronic Pushbutton Timer with Auto Shut-Off
•
Transparent Cover / Lid
•
Attractive Metallic Silver Color
•
Removable Basket Included
•
35 Watts - 50/60HZ
User Operating Procedure & Manual - READ BEFORE OPERATING!
THE FIVE BASIC STEPS:
•
Step 1 - Unpack the
"Sparkle Spa"
and basket from its box and plastic wrapping.
•
Step 2 - Connect to electrical power source. DO NOT turn the ultrasonic on unless you have first filled up the
tank with a water / solution mixture.
•
Step 3 - Lift the
"Sparkle Spa"
lid to expose the tank and add the appropriate mixture of water /
GemOro
Ultrasonic Cleaning Solution Concentrate
(sold separately) to the tank and fill the solution level to within
approximately 1/2 inch from the top of the stainless steel tanks rim or to the MAX fill line as clearly marked on
the rear center portion of the tank wall. DO NOT allow the water level to evaporate below this line as damage
may occur and the warranty will become void. Depending on the item being cleaned, water may also be
mixed with alternative appropriate cleaning solutions (liquid soaps, etc.) to achieve the desired results. DO
NOT use flammable liquids, ammonia or acid / water mixtures in the ultrasonic tank as damage may occur
and the warranty will become void. Keep the lid closed when not in use to reduce solution evaporation.
•
Step 4 - Place the item to be cleaned in the supplied basket and then submerge it in the tank and close the
lid. (As a suggestion, in the event small items such as diamond earrings, charms or small parts require
cleaning, a
household stainless steel tea strainer
or
fine mesh stainless steel basket
may be used to hold
these items safely during the cleaning process, with the tea strainer then being placed in the supplied basket.)
DO NOT place items to be cleaned directly on the tank bottom as damage to the transducer may occur.
Damage to the transducer as a result of placing items on the bottom of the tank will void the warranty. Dents
and scars on the tanks bottom are evidence of items being placed inappropriately in the tank without a
basket. DO NOT attempt to clean soft, water porous stones such as pearls, turquoise, opals and emeralds,
etc. as damage to the stones may occur. If you are uncertain of the type of stone which is in the jewelry that
you would like to clean and whether it is appropriate for cleaning in an ultrasonic cleaner, first consult with a
professional jeweler.
•
Step 5 - Press the ON button to start the cleaning process. While ON the cleaning cycle will last 3 minutes at
which time the ultrasonic will automatically shut-off. Items which require additional cleaning may be left in the
basket within the tank. The ON button may then be pressed for additional cleaning cycles as needed.
Always rinse the item off with water to remove the remaining solution and to dislodge / remove any remaining
loosened dirt from its surface once the cleaning process has been completed. DO NOT place fingers or other
body parts in the tank while the ultrasonic is operating.
MAINTENANCE & CLEANING
•
Change the solution in the tank and clean the tank regularly ONLY after first unplugging the
SS-1780
to avoid
potential electrocution,
