LA Electric Guitar DIY Kit
Thank you for purchasing this DIY Guitar Kit. The following instructions specify how
to assemble your guitar. There are a variety of finishes that can be applied to the
guitar, and it is up to you to choose the style that best suits you. Information on how
to apply the finishes are readily available on the internet. We recommend a little
research to find your favoured finishing method.
All of our headstocks are provided
‘uncut’. This gives you the opportunity to be
creative and design your own, or copy one of the popular styles. For this, we
recommend marking the shape out with a pencil, cutting the design with a Coping
Saw or Jigsaw, and then finishing off with sandpaper. We have not supplied full
instructions for this, as the process will depend on your individual design. Again, an
internet search engine search will provide far more relevant instructions than we
would be able to provide.
The guitar will need to be fully
‘set-up’ after construction. This is the process to make
the guitar fully playable. Numerous video guides can be found online, and we
recommend searching on popular video streaming sites. Alternatively, the guitar can
be professionally set up by your local professional Luthier.
Before you start you will need to make sure you have the following tools to hand:
Soldering Iron
Cross Head Screwdriver
– Medium Head
Cross Head Screwdriver
– Small Head
Battery Powered Screwdriver (not essential but advised)
Tape Measure or Ruler
Enjoy building your Guitar!
