background image

Write the model and serial  
numbers here:

Model # _________________

Serial # _________________

You can find them on a label 
on the inside of the unit behind 
the filters.

ESPAÑOL

Para consultar una version en 

español de este manual de 

instrucciones, visite nuestro sitio de 

internet GEAppliances.com.

KITCHEN HUB

49-2000492  Rev. 0   01-19   GEA

GE is a trademark of the General Electric Company. Manufactured under trademark license.

UVH1301

OWNER’S MANUAL &

INSTALLATION 

INSTRUCTIONS

SAFETY INFORMATION

 . . . . . . . . . . . . . .3

USING THE KITCHEN HUB

Hardware  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Wi-Fi Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chef Connect   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

CARE AND CLEANING

Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

INSTALLATION INSTRUCTIONS

  . . . 9

Mounting Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installation Types . . . . . . . . . . . . . . . . . . . . . . . . . 17
   A. Outside Top Exhaust . . . . . . . . . . . . . . . . . . 18
   B. Recirculating . . . . . . . . . . . . . . . . . . . . . . . . 22
   C. Outside Back Exhaust . . . . . . . . . . . . . . . . 25

TROUBLESHOOTING TIPS

  . . . . . . . . . 28

LIMITED WARRANTY

  . . . . . . . . . . . . . . 29

ACCESSORIES

  . . . . . . . . . . . . . . . . . . . . . . 30

CONSUMER SUPPORT

  . . . . . . . . . . . . . 32

Summary of Contents for KITCHEN HUB UVH1301

































Reviews: