![background image](http://html.mh-extra.com/html/ge/jx82/jx82_installation-instructions_129490001.webp)
BEFORE YOU BEGIN
1
Installation
Microwave Oven
Instructions
Built-In Trim Kits
Read these instructions completely and carefully.
•
IMPORTANT –
Save these instructions
for local inspector’s use.
•
I
MPORTANT –
Observe all governing
codes and ordinances.
•
Note to Installer –
Be sure to leave these
instructions with the Consumer.
•
Note to Consumer –
Keep these instructions for
future reference.
•
Skill level
–
Installation of this appliance requires
basic mechanical and electrical skills.
•
Completion time
–
1 to 3 hours
•
Proper installation is the responsibility of the
installer.
•
Product failure due to improper installation is not
covered under the Warranty.
• This kit is for use on models:
JEM25WMC, PEM31BMC, PEM31WMC and
PEM31SMC.
• This kit is cUL listed for installation alone or over
any GE/GE Profile single electric wall oven.
• For easier installation and personal safety, we
recommend that two people install this microwave
oven.
• Unplug the microwave oven before attempting
installation of this kit.
WARNING!
This oven must be plugged into a
properly grounded 3-hole, 120 volt receptacle as required
by the National Electrical Code.
PARTS INCLUDED
WARNING!
Before beginning the installation,
switch power off at service panel and lock the service
disconnecting means to prevent power from being
switched on accidentally. When the service
disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag,
to the service panel.
FOR YOUR SAFETY:
Questions?
Call 1-800-561-3344
or Visit our Website at: www.
GEAppliances.ca
PARTS
JX827
QUANTITY
Base Pan
Back Cover
Side Bracket
Upper Bracket
Bottom Bracket
Trim Kit
Base Support
Brackets
5 mm x 10 mm
Screw A
4 mm x 10 mm
Screw B
4 mm x 12 mm
Screw C
4 mm x 10 mm
Screw D
4 mm x 16 mm
Screw E
1
1
1
1
1
1
2
2 required
2 extra
1 required
2 extra
4 required
2 extra
10 required
2 extra
4 required
2 extra
Note:
This kit has extra screws to prevent the
technician from spending extra time locating a
replacement in case they lose one during installation.