![background image](http://html.mh-extra.com/html/ge/jx1527cbh/jx1527cbh_install-manual_129474001.webp)
PARTS INCLUDED
NOTE:
This kit has extra screws to prevent the technician
from spending extra time locating a replacement screw
during installation.
PART
QUANTITY
❒
Trim Frame
1
❒
Bottom Duct
1
❒
Top Bracket
1
❒
Bottom Bracket
1
❒
Upper Duct
1
❒
Rear Duct
1
❒
4 mm x 14 mm
22 required
Round-Head
2 extra
Screws
❒
4 mm x 14 mm
4 required
Flat-Head
2 extra
Screws
❒
Anti-Tip Brace
1
❒
Anti-Tip Bracket
1
❒
Template
1
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
Installation
Built-In Trim Kits
Instructions
JX1527 JX1530
1
❒
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT
—
Save these instructions
for local inspector’s use.
•
IMPORTANT
—
Observe all governing codes
and ordinances.
• Note to Installer –
Be sure to leave these instructions
with the Consumer.
• Note to Consumer –
Keep these instructions for future
reference.
• Skill level –
Installation of this appliance requires basic
mechanical and electrical skills.
• Completion time –
1 to 3 hours
•
Proper installation is the responsibility of the installer.
•
Product failure due to improper installation is not covered
under the Warranty.
•
This kit is UL/CSA listed for installation alone or over any
GE/GE Profile single electric wall oven. Not for use adjacent
to (within 2 feet of) any gas or electric range, cooktop
or oven.
•
For easier installation and personal safety, we
recommend that two people install this microwave oven.
•
Unplug the microwave oven before attempting installation
of this kit.
•
This kit is for use on models: PEB1590DMBB,
PEB1590DMWW, PEB1590SMSS, PEB159CDNBB,
PEB159CSNSS and PEB159CDNWW.
•
Do not alter or modify any part of this kit or the oven.
WARNING
—
This oven must be plugged into a
properly grounded 3-hole, 120V receptacle as required by
the National Electrical Code or Canadian Electrical Code.
FOR YOUR SAFETY:
WARNING
—
Before beginning the installation,
switch power off at service panel and lock the service
disconnecting means to prevent power from being switched
on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
Questions? In the U.S., call 800.GE.CARES (800.432.2737)
or Visit our Website at:
ge.com.
In Canada, call 1.800.561.3344
or Visit our Website at:
GEAppliances.ca.