Skill Level:
High
Average
Low
Completion Time:
1 to 3 Hours
Proper installation is the responsibility of the installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty. See the Owners Manual for warranty
information.
CAUTION: Before you begin
Read these instructions carefully and
completely.
• IMPORTANT- Save these instructions for
local inspector’s use.
• IMPORTANT- Observe all governing codes
and ordinances.
Self Cleaning Free-Standing
Electric Range
Installation
Instructions
EER2000, EER3000, EER3001, EER3002, JBP10, JBP24, JBP26, JBP30,
JBP35, JBP48, JBP64, JBP66, JBP68, JBP69, JBP71, JBP78, JBP80,
JBP82, JBP90, JBP91, JBP95, JB500, JB600, JB700, JB800
• NOTE TO INSTALLER- Be sure to leave
these instructions with the consumer.
• OWNER- Keep these instructions for future
reference.
• WARNING- This appliance must be
properly grounded.
Parts Included
Tools You Will Need
Pub. No. 31-10513
229C
4053P493
1
“If you have questions, Call 800-GE-CARES
or visit our website at:
www.GEAppliances.com”
1/4”Nut
driver
Adjustable wrench
Pencil
Materials Needed
Lag Bolts Anchor Sleeves
4- Wire Cord
4’long
3 -Wire Cord
4’long
(For Concrete Floors Only)
( UL Approved 40 AMP)
OR
;
;
;
y
y
y
Drill with
1/8” Bit
Anti-Tip Bracket and leg leveler
Safety
Glasses
Tape Measure
Level
5/16” Hex Head
Nut driver
Phillips
Screwdriver
Flat-Bladed
Screwdriver
1
2
3
4
