![background image](http://html.mh-extra.com/html/ge/gtds820gdws/gtds820gdws_dimensions-and-installation-information_2199830001.webp)
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
GTDS820/825GD
GE
®
7.8 cu. ft. capacity gas dryer with stainless steel drum and steam
Specification Created 7/12
370174
Exhaust Option:
When viewed from the front
of the unit, exhaust 3-way via rear, left and
bottom. Dryer is shipped exhausted to the
rear. Alternate exhausting knockouts are
supplied.
Gas:
An individual, properly-grounded
branch circuit, with a three-prong grounding-
type receptacle, protected by a 15 or 20
amp circuit breaker or a time-delay fuse is
required.
Gas Dryer Electric Rating:
120V, 60Hz, 9A
Gas (BTU/HR):
16,000. Factory-equipped for
natural gas. Tested for LP gas. LP gas supply
requires a conversion kit. Check installation
instructions for correct kit and have a
qualified gas technician install a conversion
kit. See dryer ducting information for proper
installation.
Note:
Dryer wall outlet must be located within
36" of service cord entry and accessible when
dryer is mounted in position.
Installation Information:
For complete
information, see installation instructions
packed with your dryer.
Dimensions and Installation Information (in inches)
Power Cord Locations 7.8 cu. ft. dryers