![background image](http://html.mh-extra.com/html/ge/evolve-erl1/evolve-erl1_installation-manual_128263001.webp)
LED Streetlight (ERL1-ERLH-ERL2)
Evolve
™
LED Roadway Light
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Save these instructions for future use.
WARNING
Risk of electrical shock. Disconnect power before service
installation, or maintenance of the product.
Installation Guide
GEH-6064
SPECIFICATIONS
GENERAL
• Approximate Net Weight:
- ERL1/ERLH: 15lbs (7.0kg)
- ERL2: 24lbs (10.9kg)
• Dimensions: (L x W x H)
ERL1/ERLH: 22.1. x 13.5 x 6.4 in. (561 x 344 x 162 mm)
ERL2: 26.3 x 12.8 x 6.4 in. (667 x 324 x 162 mm)
• IP Rating: Optical IP65, Standard Electrical Enclosure:
UL 1598 Wet Location Rated
• Recommended Mounting Height: 27 - 40 ft. (8.2 - 12.2m)
• EPA:
- ERL1/ERLH: 0.50 ft² (0.046 m)
- ERL2: 0.35 ft² (0.033 m)
• Operating temperature range:
- ERL1: -40
o
C to 50
o
C
- ERLH/ERL2: -40
o
C to 40
o
C**
** Selected SKU’s s50
o
C. See product
datasheet.
• This luminaire is for outdoor lighting service and
should NOT be installed in areas of limited ventilation
or in high ambient temperature.
• Luminaire is designed to be mounted horizontally with
LEDs facing down.
CAUTION
Risk of injury. The luminaire should be mounted so that
prolonged staring into the luminaire at a distance closer
than 0.50m is not expected.
CAUTION
Risk of injury. Wear safety glasses and gloves during
installation and servicing.
WARNING
Risk of injury or damage. Unit will fall if not installed
properly. Follow installation instructions.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class [A]
Lighting Equiment
complies with the Canadian standard
ICES-005
[A]/NMB-005[A].
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.