GE
Lighting
LED165/M400/740 Tether Kit
Installation Guide
BEFORE YOU BEGIN
Read these instructions completely
and carefully. Save these instructions
for future use.
STOP
WARNING
!
Risk of electrical shock
. Disconnect power before servicing
or installing product. Properly ground electrical enclosure.
WARNING
!
Risk of injury or damage.
Unit will fall if not installed properly.
Follow installation instructions.
CAUTION
!
CAUTION
!
Risk of injury.
Wear safety glasses and gloves during
installation and servicing.
Check the ballast information. Make sure the ballast is in
GE’s ballast compatibility list. Using with wrong ballast may
result in overheat or lamp damage. See ballast compatibility list
at:
http://www.gelighting.com/led-hid-ballast-compatibility
Tools and Components Required
• Nut driver or small socket wrench
Warning:
Only use the parts provided with the kit.
Please contact GE at
1-800-338-4999
for any questions/issues regarding the kit.
