Gblife TS-8210 Wireless Weather Station
User Manual
1. Introduction
Thank you for your purchase of the Gblife TS-8210 Colorful LCD Wireless Professional Weather
Station with Thermo-hygrometer .The following user guide provides step by step instructions for
installation, operation and troubleshooting.
2. Getting Started
Note:
In order to enable better and faster matching of indoor and outdoor signals, please turn on
the remote sensor first, then the indoor weather station. If you turn on the base station first, the
outdoor data will not display properly, please long press C button to receive the
outdoor signal manually.
NOTE: This weather station can only match and display one outdoor sensor, multi-channel
switching is not supported.
2.1 Remote Sensor Set Up
Note:
To avoid permanent damage, please take note of the battery polarity before inserting the
batteries.
Figure 1
Push the battery cover away in the direction of the indicated arrow, as shown in Figure 1. Insert
two fresh AAA batteries (with the negative terminal of the battery in contact with each spring).
Lithium batteries are recommended for cold weather environments. Close the battery cover. The
LED shown in Figure 1. will light up (visible through the plastic).
2.2 Indoor Machine Screen Display
2.2.1 Screen Layout(
Figure 2.)
Note
: The following illustration shows the full segment LCD display for description purposes
only and will not appear like this during normal operation.
