U
pd
at
e
U
pd
at
e
U
pd
ate U
pd
ate
Important Information About Your
Second Hard Disk Drive Module
This Gateway Update contains the following information:
◆
how to modify your system settings to work with the second
hard disk drive module
◆
how to install the hard disk drive module in the modular option
bay
◆
how to switch hard disk drives in the mounting bracket
◆
suggestions for ways to use your second hard disk drive
For additional technical information about hard disk drives, see
Maintaining and Troubleshooting Your Solo Notebook.
Modifying your system settings
Some changes need to be made to your system settings so your second
hard disk drive works correctly with your system.
If you purchased your second hard disk drive when you purchased
your notebook, these changes are already made and you do not need
to perform the following procedure.
To modify the system settings:
1.
Start up the notebook.
2.
Press F2 when prompted to enter the BIOS Setup utility. The
Main menu opens.
3.
Using the down arrow key, highlight
Secondary Master
.
4.
Press E
NTER
. In the screen that opens, the
Type: [AUTO]
option is
highlighted.
