www.gateway.com
Replacing the 802.11 Mini PCI card
This package includes a replacement 802.11 Mini PCI card for your Gateway
notebook and these printed instructions.
Tools you need
You will need a small Phillips screwdriver to replace the 802.11 Mini PCI card.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as
electrostatic discharge
(ESD).
Before replacing the 802.11 Mini PCI card, follow these guidelines:
■
Turn off your notebook power.
■
Remove the battery(ies) and unplug the power cord.
■
Disconnect all peripheral devices and remove any PC Cards.
■
Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
■
Touch a bare metal surface on your workbench or other grounded object.
■
Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
■
Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
Caution
ESD can permanently damage electrostatic discharge
sensitive components in your notebook. Prevent ESD
damage by following ESD guidelines every time you open
your notebook case.
Warning
To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook, remove the battery,
and unplug the power cord and modem cable before
opening the case.
