background image

Printed in China

AB14898

SCREEN DOOR

PACKAGE CONTENTS

A

PART

PART

A

AA

BB

CC

DESCRIPTION

DESCRIPTION

Security Door

QUANTITY

QUANTITY

1

1
1

Styles may vary

HARDWARE CONTENTS

8

4 in. one-way screws

Top bar

Locking side bar

AA

BB

CC

NOTE: All parts  not shown at actual size.

PREPARATION

Tools Recommended for Assembly (not included)

One-way screw tool, drill 3/16 in. bit, level or string plumb, measuring tape and pencil.

IMPORTANT:

 Read all instructions carefully before starting installation.

Questions, problems,missing parts?

Before returning to your retailer, call our customer service department at 1-877-442-8347, 8 a.m.-8 p.m., EST, Monday-Friday.

ASSEMBLY INSTRUCTIONS

1.Identify which way the security

   door is to open.

5.Align the 

lock bolt holes 

in the 

locking

   side bar (CC) 

with the extended lock 

   bolts, making sure the locking side bar 

  (CC) is vertically true (plumb). 

6.Mount the locking side bar (CC)  to door 

   frame jamb. Drill holes. Fasten the locking 

   side bar (CC) to the house using the 

   screws (AA). Tighten screws (AA) only

   halfway 

at this time. When you are 

   satisfied with the position and operation 

   of the security door, tighten screws (AA) 

   securely to the house.

7.Mount top bar (BB) at top of door

   using remaining 2 screws (AA).

   Leave approximately 1/8 in. space

   between top bar (BB) and top of

   door frame.

2.Install the lockset (sold separately)

   with 2-3/8 in. backset. Then, fully 

   extend the lock bolts into the “ locked”

   position.

3.Place security door in front of opening

   at desired height, making sure that

   the security door is vertical (plumb).

   Determine where to drill by marking

   through the pre-drilled holes on the

  

 hinge-side jamb 

with pencil.

4.Drill holes. Using screws (AA), fasten 

   door to house.

   Tighten screws (AA) only halfway 

   at this time in case repositioning the 

   door is required later.

1. Security doors are finished with a heavy-duty powder coat finish. In order to maintain your finish, it is recommended

    to clean and wax the security door 2 times per year, preferably in late fall and early spring. Doors directly subjected to the sun, 

    salt-air or moisture may require more maintenance.

2. Any scratches or abrasions to the door finish should be immediately touched up with enamel or rust protective paint.

3. To keep your door looking like new, any signs of rust should be sanded with mild sandpaper and touched up immediately

    with enamel or rust protective paint.

4. Hinges and lockset (sold separately) should be oiled and lubricated regularly to reduce friction wear.

5. Make sure any sprinklers near your new door are directed away.

6. Do not allow vegetation on your security door. This will lead to extra maintenance.

7. Make sure to keep your weed eater and lawn mower away from your security door. It may create unwanted chips to your

    door finish.

CARE AND MAINTENANCE

WARRANTY

2

1

3

4

5

7

6

In the event that our products or any parts thereof should prove to be defective in material or workmanship, under normal use and service, and 

such defects are reported to us within one (1) year from the date of purchase, at our option, we will repair or replace the door. Replacement items 

may vary in style due to changes in suppliers and product. In addition, the paint finish is warranted not to blister, crack, or fade for one year from 

the purchase date. Damage due to rust is excluded from this warranty. Screens, glass and hardware are also excluded from this warranty. This 

warranty does not cover damage caused by vandals, break-ins, or attempted break-ins. This warranty is voided if the products is modified in any 

way. We assume no responsibility for incidental or consequential damages arising from defective products; nor do we assume any responsibility 

for failures, breakage or cost which result from abuse, abnormal use, misuse, negligence, accident, exposure to corrosive fumes, condensates, 

fire or damage as a result of improper installation. Except as stated above, we make no warranties, either expressed or implied, as to any matter 

whatever, including without limitation, the condition of our products ,their merchantability or fitness for any particular purpose. We assume no other 

expense such as labor costs of any kind for removal, replacement or parts, repairs or reinstallation.

ITEM #0637205/#0637206/#0637207/#0637208

SENTRY SECURITY

MODEL: 801-32-WHT/801-36-WHT/801-32-BLK/801-36-BLK

Reviews: