1-800-624-1903
Tel: 916-784-0200 Fax: 916-784-1425
GarnerProducts.com
10620 Industrial Avenue Suite 100 Roseville, CA 95678
4075-918B Manual, Install, IC-HD2X
2018-3-26
1/2
HD-2X IRONCLAD
Erasure Verification System
ASSEMBLY
•
Completely read through the instructions before
beginning assembly process.
•
Do not open equipment chassis. Assembly only
requires access to exterior of units.
Package includes:
• Imaging device and
HDMI cable
• Touch Screen Control
Head
• 2 control head bolts
• Mounting bracket
1B
1A
2B
2A
Using a torx wrench, remove three bolts from the upper right and
lower right side of the HD-2X face plate. Save bolts for Step 2.
Using a torx wrench and three bolts from Step 1, attach the imaging
device to the HD-2X.
See cable connecting instructions on page 2.
• Scanner, Stand
• Converter Cable
• DB9 cable
• A/C power cable
• 3/16 allen wrench
• T-20 torx wrench
• Stylus
3A.
Attach stylus by slipping split ring from stylus tether onto one of the control head bolts before attaching
to mounting bracket and control head.
3B.
Using the 3/16 allen wrench and 2 control head bolts, attach
touch screen and stylus to mounting bracket using center holes.
3B
3A
