background image

1

SERVICE DEPARTMENT: (724) 746-1100

Contents

GENERAL SAFETY INFORMATION ....................................   1
1.0 INSTALLATION ..............................................................   2
2.0 OPERATION ...................................................................   3
3.0 MAINTENANCE .............................................................   4
ENGINEERING DATA ..........................................................   5
DIMENSIONS / WEIGHTS ...................................................   7
TROUBLESHOOTING ..........................................................   9
PARTS LIST ..........................................................................   10
WARRANTY ..........................................................................   12

MAINTENANCE INSTRUCTIONS

1. Air cooled models - Condenser coil - Clean off

accumulated dust and dirt monthly.

2. Models RHP64, RHP93, RHP100, and RHP178 - Moisture

separator - Replace filter sleeve yearly, or when pressure

drop across dryer is excessive, whichever occurs first.

3. Check daily to be sure automatic drain is discharging.

4. Manually drain separator weekly by pushing manual

override switch on drain timer.

GENERAL SAFETY INFORMATION

1. PRESSURIZED DEVICES

This equipment is a pressure containing device.

Do not exceed maximum operating pressure as

shown on equipment serial number tag.

Make certain equipment is depressurized

before servicing.

2. ELECTRICAL

This equipment requires electricity to operate.

Install equipment in compliance with national and

local electrical codes.

Standard equipment is supplied with NEMA 1

electrical enclosures and is not intended for

installation in unprotected outdoor or

hazardous environments.

Disconnect power supply to equipment when

performing any electrical service work.

3. BREATHING AIR

Air treated by this equipment may not be

suitable for breathing without further purification.

Refer to OSHA standard 1910.134 for the require-

ments for breathing quality air.

    7610.478.38C     4/04

18-2-680

RHP SERIES HIGH PRESSURE

REFRIGERATED COMPRESSED AIR DRYERS

MODELS: RHP13 through RHP178

INSTRUCTION MANUAL

Internal Use Only

7610.482.11C/040417

Summary of Contents for RHP Series













Reviews: