Version 1,30
th
April 2020, Page
1
of
5
Ezy-Drink
®
CP-
BS Lead Safe™ Hob Mounted Bottle
Filler Tap with Reduced Flange
PRODUCT CODES:
-
170.13.33.00
SPECIFICATIONS
Chrome plated assembly for durability and easy cleaning
Lead Safe™ brass construction
Reduced flange size for installations with limited space.
IMPORTANT: All Ezy-Drink
®
Bottle Filler taps are tested in accordance with AS/NZS 3718 and leave our
premises in good working order.
As ‘lead free’ is not currently defined by low in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of s1417 of the USA’s Safe Drinking Water Act (SDWA)
and the relevant US standards NSF61 / NSF372. The SDWA defines ‘lead free’ as “not more than a weighted average of 0.25% lead when used with respect to the wetted surface of pipes, pipe fittings,
plumbing fittings and fixtures”.
TECHNICAL DATA
Inlet
½” BSP – Male
Outlet
Gooseneck
Headworks
Push Button
Working Pressure Range (kPa)
Min
50
Max
500
Working Temperature Range (°C)
Min
5
Max
60
Nominal Flow Rate (LPM)
4.0
Construction
Brass
Finish
Chrome Plate
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
Hex Key
Thread tape
Adjustable spanner
