background image

Pub. 42004-449B 

GAI-Tronics Corporation  400 E. Wyomissing Ave.  Mohnton, PA  19540  USA 

610-777-1374  

„

  800-492-1212  

„

  Fax:  610-796-5954 

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

 

 

G A I - T R O N I C S ®   C O R P O R A T I O N  

A   H U B B E L L   C O M P A N Y  

Model 210-001 Corridor Telephone 

Confidentiality Notice 

This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive 
business and technical information that is confidential and proprietary to GAI-Tronics.  GAI-Tronics 
retains all intellectual property and other rights in or to the information contained herein, and such 
information may only be used in connection with the operation of your GAI-Tronics product or system.  
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. 

General Information 

The Model 210-001 Corridor Telephone offers standard 
line-powered telephone operation in a rugged package, 
including the following features: 

 

Volume control handset with a 29-inch, swivel 
armored cord 

 

Brushed stainless steel housing 

 

Ringer with loudness control 

 

Less than 3 ½-inch depth (measured from the 
mounting surface) 

GAI-Tronics’ Model 210-001 Corridor Telephone is 
ideally suited for installation in any area requiring the 
Americans with Disabilities Act maximum protrusion 
depth of 4 inches (corridors, hallways, passageways, 
etc.). 

The Model 210-001 can be surface-mounted in any 
indoor area requiring telephone communications.  The 
unit’s rear mounting plate provides telephone line 
access, eliminating visibility of, or access to the cabling.  
Additionally, the Corridor Telephone is secured with 
tamper-resistant hardware to prevent vandalism. 

Installation Guidelines 

When installing any GAI-Tronics telephone equipment, please adhere to the following guidelines to 
ensure the safety of all personnel: 

 

NEVER install telephone wiring during a lightning storm. 

 

NEVER install telephone jacks in wet locations unless the jack is specifically designed for wet 
locations. 

 

Figure 1.  Model 210-001 Corridor Telephone 

Summary of Contents for 210-001











Reviews: