FRE-207
INSTRUCTIONS
from P.R.Engineering Ltd
www.laser-level.co.uk
Tel: 01246 269777
Thank you for purchasing the
FRE-207
TRUE GRADE, Rotary laser level kit.
These Instructions are intended to explain the
quick basics
to operating this
equipment. Please read them in conjunction with the Manufacturer's User
Manual included in the kit. If you need any more help/advice or the
instrument requires calibration or repair, then please contact our Service Dept
on
tel 01246 269 777 or fax 01246 260 007. We would be pleased to help.
Power source:
This is a special battery pack located in the base of the laser. Remove & refit
via a central screw - finger tight (no tools required).
It contains 4pc x "sealed for life" Ni-MH type C, 4000mAh, 1.2V cells. Please
note that this battery pack can be charged either in or outside of the laser.
The Mains Charger (supplied) will charge most batteries in around 7 hours to
give around 20hrs of continuous use. It takes 4 to 5 charge/discharge cycles
1
