background image

C o p y r i g h t

Copyright

Fujitsu PC Corporation has made every effort to ensure 
the accuracy and completeness of this document. 
However, as ongoing development efforts are continually 
improving the capabilities of our products, we cannot 
guarantee the accuracy of the contents of this document. 
We disclaim liability for errors, omissions, or future 
changes.

Fujitsu, the Fujitsu logo, and LifeBook are registered 
trademarks of Fujitsu Limited.

The following are registered trademarks of Microsoft 
Corporation: MS, MS-DOS, Windows.

PCMCIA is a trademark of the Personal Computer 
Memory Card International Association.

Intel and Pentium are registered trademarks of Intel 
Corporation.

Adobe Acrobat Reader is a registered trademark of 
Adobe System Inc.

LapLink is a registered trademark of LapLink.com, Inc.

PowerQuest and Drive Image are registered trademarks 
of PowerQuest Corporation.

Netscape is a registered trademark of Netscape 
Communications Corporation.

McAfee is a registered trademark of Network Associates/
McAfee.com, Inc.

All other trademarks mentioned herein are the property 
of their respective owners.

© Copyright 2003 Fujitsu PC Corporation. All rights 
reserved. No part of this publication may be copied, 
reproduced, or translated, without prior written consent 
of Fujitsu PC Corporation. No part of this publication 
may be stored or transmitted in any electronic form 
without the written consent of Fujitsu PC Corporation.

B5FH-8441-01EN-00

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name:

Fujitsu PC Corporation

Address: 

5200 Patrick Henry Drive

Santa Clara, CA  95054

Telephone:

(408) 982-9500

Declares that product:

Model Configuration:
LifeBook B2630

Complies with Part 15 of the FCC Rules.

This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:

(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference 
received, including interference that may cause undesired operation.

B Series.book  Page 1  Tuesday, March 25, 2003  5:29 PM

Summary of Contents for LifeBook B2630



















































































































Reviews: