background image

i

ESPRIMO D5210 User’s Manual

Fujitsu endeavours to ensure that the information in this document is correct, but accepts no liability
for any error or omission. Any procedures described in this document for operating Fujitsu products
should be read and understood by the operator before such products are used. To ensure that Fujitsu
products function without risk to safety and health, such procedures should be strictly observed by
the operator. The development of Fujitsu products and services is continuous and published
information may not be up to date. Any particular issue of a product may contain facilities not described
herein. It is important to check the current position with Fujitsu. Specifications and statements as to
performance in this document are Fujitsu estimates intended for general guidance. They may require
adjustment in particular circumstances and should therefore not be taken as formal offers or
commitments.

ESPRIMO is a trademark of Fujitsu Limited. The following are registered trademarks of Microsoft
Corporation: MS, MS-DOS, Windows 

®

 NT, Windows 

®

 98, Windows Millennium, Window 

®

 2000,

Windows XP and Windows Vista.
Intel and Pentium are registered trademarks of Intel Corporation in the U.S.
Celeron is a registered trademark of Intel Corporation in the U.S.
Other product names are trademarks or registered trademarks of respective companies.
Other products are copyrighted by individual companies.

All other trademarks referenced are trademarks or registered trademarks of their respective owners,
whose protected rights are acknowledged.

Copyright 

©

 Fujitsu PC Asia Pacific

All rights, including rights of translation, reproduction by printing, copying or similar methods, in part
or in whole, are reserved.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Delivery subject to availability. Right of technical modification reserved.

DECLARATION OF CONFORMITY

According to FCC Part15

Responsible Party: Fujitsu Computer Systems Corporation
Address:

1250 East Arques Avenue, Sunnyvale, CA94085

Telephone Number: (408)746-6000

Product Name:

Personal Computer

Model Number:

FPC5D202DZ

Conforms the following specifications:

FCC Part15, Subpart B, Class B Digital Device

This device complies with Part 15 of the FCC Rules. Operation are subject to the following two
conditions: (1)This device must not be allowed to cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Website: www.pc-ap.fujitsu.com

Summary of Contents for Esprimo D5210






















































Reviews: