background image

Contents

Product Registration ......................................................... 2

Versión en español ........................................................... 2

IMPORTANT SAFETY INSTRUCTIONS...............................3-4

Setting Surface Controls ................................................... 5

Before Setting Oven Controls ........................................... 6

Setting the Oven Control Style 1 or 2 - Bake ...............7-11

Self Cleaning Oven ....................................................12-13

General Cleaning .......................................................14-16

Changing Cooktop and/or Oven Lights .......................... 16

Customizing Your Oven Performance ............................. 17

Avoid Service Checklist ..............................................18-19

Warranty......................................................................... 20

OWNER’S GUIDE

Coil Surface Elements

Electronic Oven Control - ES I or ES II

Self Cleaning Oven Feature

READ AND SAVE THESE INSTRUCTIONS

ELECTRIC RANGE

This Owner's Guide contains general operating instructions for your range and feature

information for several models. Your range 

will not

 have all the described features.

316135917 (0101)

Summary of Contents for 316135917





















Reviews: