12V 2.5A
ETHERNET
Digital Satellite Recorder
S8200
sat
S8200 Quick Install Sheet
Thank you for choosing Dish TV for your
MyFreeview Satellite
Recorder. This Quick Start Guide will provide you
with instructions for connecting and troubleshooting your new unit.
Please check that your Dish TV box contains all the
components shown under
“What’s in the Box?”
Dish TV S8200
Functions
Red/Green Power LED
Power/Standby Button
FRONT PANEL
REAR PANEL
Ethernet
USB Port
HDMI Port
Composite
WiFi
The S8200 is a MyFreeview Satellite Recorder. It requires a Satellite Dish & good signal levels to operate correctly.
It does not use an Aerial.
For further help, please refer to the Technical Support Contact Details under the
Main Menu > Installation > System Info
.
What’s in the box?
Please check to see whether you have all the following in this box, you should have:
Your new set top box
AV Cables
Remote Control (2x Batteries)
Some items missing? Please contact the retailer or store you purchased this from.
Getting Connected:
Connect the cable that comes from your Dish to the SAT1IN socket
on the back of your set top box.
Connect the Loop
Cable between LOOP OUT and SAT2IN sockets.
Connect the AV cable that came with your unit between the yellow, red
and white sockets on the back panel of the unit and your TV, or you can just use an HDMI cable if you have one.
Getting Started:
1 - Open the battery cover of the remote control insert the two AAA size batteries so the + and - marks on the batteries
match the + and - marks inside your remote. Replace the battery cover.
2 - Switch your TV on and select the video input you have connected your S8200 to. Now switch the S8200 on and wait
for it to boot up (it should take approx. 30 seconds).
3 - You will get the “Loop Cable Installation” screen first, press OK if installed, “Welcome First Time Installation” screen
should now show up, please follow all on screen instructions to finalize the set up of your
MyFreeview Satellite
Unit.
For further details on operating your S8200 unit, please refer to the
User Manual
under,
Main Menu > Installation.
Install Sheet
12V DC Port
SAT IN/LOOP OUT
Power Supply
sat
Loop Cable
