![background image](http://html1.mh-extra.com/html/franke/sion-ffps20200/sion-ffps20200_installation-manual_2327548001.webp)
LIMITED LIFETIME WARRANTY
All faucets installed in a private residence will carry a limited lifetime
warranty on all mechanical parts to be free of manufacturing defects
in material and workmanship under normal usage. All chrome finishes
carry a limited lifetime warranty; all other finishes are warranted for
five (5) years fr
o
m the original date of purchase.
Marine and Outdoor Installation
warranted for Marine and Outdoor installations.
This warranty applies only to the original owner, providing the product
has been installed in accordance with our installation instructions,
used as recommended and in a normal residential application. In the
event of a warranty claim, the owner will be required to provide proof
of purchase - save sales receipt. This warranty covers all components
which make the product operational. Franke, at its option, may repair
or replace the product or components necessary to restore the pro-
duct to good working condition. Franke reserves the right to inspect
the installation prior to the actual replacement of the product or com-
ponent part. This warranty does not cover misuse or abuse, acciden-
tal damages, scuffs or scratches, improper installation, abnormal
usage, negligence or damage caused by improper maintenance or
cleaning. Normal wear of parts is excluded from the warranty.
Damage caused by impurities or acts beyond our control are not
covered. Any product or part which has been repaired or altered in
any manner outside of Franke's factory, unless previously authorized
in writing by Franke, will void warranty.
Any replacement excludes
transportation and any labor re-installation costs.
This warranty
does not allow recovery of incidental or consequential damages such
as loss of use, delay, property damage or other consequential dama-
ge, and Franke accepts no liability for such damages.
The Franke warranty is limited to the above conditions and to the
warranty period specified herein and is exclusive.
Franke DISCLAIMS
all other warranties, expressed or implied, including IMPLIED
WARRANTIES OF MERCHANTABILITY AND/OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty gives you
specific legal rights that may vary from state to state.
Further information
For any further information about our products, about the installation of
REV.0
0
2
/201
6
PAINI CODE
SION
STANDARD MAINTENANCE AND TROUBLESHOOTING
1. Shut off the water supply to the faucet.
2. Turn on the faucet briefly to relieve any pressure inside the faucet.
3. Move the faucet handle to the “ OFF” position.
4.
R
emove
the plastic cover C from the handle A
.
5. Remove the screw B using an allen key.
6. Pull the lever base A from the body .
7. Unscrew the cap
E
.
8. Unscrew the cartridge lock nut
F
.
9. Lift ceramic disk cartridge
G
from the body and replace it with new
cartridge. Ensure the two lugs on bottom of the cartridge sit properly
in the allocated holes at the base of the body.
10. Re-assemble faucet in reverse order.
11. Test for leakage.
GENERAL MAINTENANCE
Clean aerator periodically for any buildup .
Do not use harsh detergents, solvents, chemical agents, metallic sponges,
etc. that could harm the surface and damage the finish.
Clean only with a soft sponge and soapy water.
SPARE / REPLACEMENT LIST
Franke Kitchen Systems
800 Aviation Parkway
Smyrna, TN 37167, USA
Phone: 800-626-5771
Email: [email protected]
INSTALLATION MANUAL
them or about the guarantee, please contact our customer service
department:
the original purchaser of its faucets effective January 1, 2003.
:
Franke faucets are NOT
Franke Kitchen Systems,LLC extends the following warranty to
REPLACING THE CARTRIDGE
*
*
Must specify finish
"
CH
"
chrome
"
SN
"
satin nickel
(i.e. F20001CH or F20001SN)
A+B+C+
D
Handle assembly
F200
02
**
F20024
F20004
F20005
F20006
H+I+J+K
.
F20007**
F20025
**
F20009
F20010
P.
Q.
R.
S.
T.
F20011
Pull out spray assembly
Base washer
Mounting hardware kit
Weight
Pull out hose
Check
valve
Pull out supply hose
Supply hoses
Base plate + Base
gasket
Plastic flange
F20012
E
.
Cap
F
.
Lock nut
G
.
Cartridge
H.
Washer G1/2"
I
Check Valve 1.75 gpm
K. Aerator
F20013
F20014
F20015
F20016
**
F20017
L.
M.
N.
P
.
F20023
**
SION
FFPS20200
Chrome
FFPS20280
Satin Nickel
O+