![background image](http://html1.mh-extra.com/html/fp/postbase-20/postbase-20_setup-and-installation-manual_2325870001.webp)
postbase 20
Set-Up and Installation Guide
m
e
t
s
y
s
g
n
il
i
a
M
l
a
u
n
a
M
r
o
t
a
r
e
p
O
s
p
e
t
s
t
s
ri
F
1
- PostBase Mailing Machine
2
- Scale Platform
3
- Catch Tray with Bracket
4
- Ink Cartridge Set
5
- Power Cable
6
- Ethernet Cable
7
- First Steps Guide
8
- Hand Feed Tray
9
- FP Shipment Packing List
Checking the Contents of the Package
1
Before you Begin,
Activate your PostBase Machine
- Locate the Shipment
Packing List included
with your shipment.
Find your
Customer #
and
Meter Serial #
as
shown to the right.
- Call FP toll-free at
866-750-7570
, then
select
Option 1
to look
up your PIN.
- Key in your
Account #
,
Zip Code
, and
Meter Serial #
as
directed by the phone prompts.
Standard Contents*
10
- Envelope Moistener
Optional Accessories*
1
2
3
4
5
6
7
10
- Please allow 30 minutes for PostBase Installation
9
Attach Hand Feed Tray (or Envelope
Moistener) to the PostBase Machine
- Gently raise the left hand side of the PostBase as
indicated by the arrow
- Slide the Hand Feed Tray up to the left side of the
PostBase, as shown
- Gently lower the PostBase Machine over Hand Feed
Tray’s locking clips, as shown
2
(Note: Both the Hand Feed Tray and PostBase should be flush)
*List applies to
new
PostBase orders only.
Exchange
orders will
recieve the PostBase Mailing Machine Base (item #1 above) only.
- Insert Catch Tray Bracket into the Catch Tray as shown
- Gently raise the right hand side of the PostBase as
indicated by the arrow
- Slide the Catch Tray up to the right side of the
PostBase, as shown
- Gently lower the PostBase Machine over the Catch
Tray’s locking clips, as shown
3
Fasten Scale Platform
- Lower the Scale Platform onto the metal integrated
scale post on top of the PostBase, as shown
- Make sure one of the long grooves is facing the front
of the machine
4
Connect Catch Tray
(Note: Both the PostBase and Catch Tray should be flush)
8
Connect Power and Ethernet
5
Power Connection
- Connect one end of the Ethernet Cable to the back
of the PostBase Machine as shown; plug the other
end
into an open Ethernet jack
- Attach the female end of the Power Cord to the
back of the PostBase Machine as shown; plug the
male end into a nearby power outlet
Ethernet Connection
6
Power On Your PostBase
- Push the Power Button on the front of the
PostBase Machine, as shown
- The LCD Touch Screen will illuminate and will
begin the installation process; as shown
- System startup takes up to 2 minutes, please
wait until instructions appear on the LCD Touch
Screen to continue with the installation.