![background image](http://html1.mh-extra.com/html/foxfury-lighting-solutions/sunbolt/sunbolt_operating-instructions_2325472001.webp)
Foxfury SUNBOLT Inst Manual 12 11
1
SUNBOLT LED SPOTLIGHT
OPERATING INSTRUCTIONS
200-1006
Sunbolt 6 - 18°
200-1008
Sunbolt 6 Tac - 8°
200-1009
Sunbolt 6 Tac-Strobe 8°
The SUNBOLT Spotlight is a powerful
spot/search light. Key features include:
•
Fully submersible to 24 ft / 7 m
•
Instantly turns on to Low Light Level
•
Minimal Projected Heat, and no warm
up/cool down is needed
IMPLEMENTATION
1.
Unit mounts on a standard ¾” inch
diameter post.
2.
Turn Diamond Knob clockwise to secure to
post.
3.
Turn Diamond Knob on side of head
counter-clockwise to loosen brake, holding
the back of the unit by the handle.
4.
Adjust up/down and tighten brake
clockwise.
POWER SOURCE: AC Power Supply
•
Dimensions: 12” x 8” x 5” (305 x 203 x 127
mm)
•
100 – 240 VAC 50/60 Hz Power Supply
•
220 Watt Power Consumption
•
Power Switch
•
On LED Indicator
•
Dimming Knob
•
Insert keyed connector on Power Supply,
and secure by turning ring cap clockwise
(below)
OPERATIONAL MODES
The SUNBOLT Spotlight can cycle through -3-
Operational Modes, by pushing the black rubber
button switch at the center-top of the Power
Source.
All Sunbolt Models will automatically turn on in
Low Mode. Modes are as follows:
Mode
Light Output
Low 3,000
Lumen
Medium 7,000
Lumen
High 11,000
Lumen
Please see the two DMX connectors for external
control.
P/N 200-1009 ONLY:
Pressing one more time (after High Mode) will
activate the FoxFury Turbo Strobe mode.
NOTE: This mode may induce vertigo. Prolonged
exposure has shown to cause vomiting as well.