© Copyright 2009 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
27 October 2009
Visit these links for more information and documentation for your Fortinet product.
• Technical Documentation -
http://docs.fortinet.com
• Fortinet Knowledge Center -
http://kb.fortinet.com
• Fortinet Technical Support -
http://support.fortinet.com
• Training Services -
http://campus.training.fortinet.com
Connecting
Straight-through
Ethernet cable
Power Cable
Null Modem Cable
(RS-232)
FortiGate-30B
Tools and Documenation
Copyright 2008 Fortinet Incorporated. All rights reserved.
Trademarks
QuickStart Guide
REGISTER
Power Supply
Crossover
Ethernet cable
POWER
STATUS
4
3
2
1
LINK / ACT
10/100
POWER
STATUS
4
3
2
1
LINK / ACT
10/100
POWER
STATUS
4
3
2
1
LINK / ACT
10/100
Back
Internal Interface,
switch connectors
1,2,3,4
Power
Connection
USB
(future)
1
2
3
4
DC+12V
USB
RS-232 Serial
Connection
Front
Power LED
Status LED
Interface
status LEDs
Straight-through Ethernet cable connects
to hub or switch on the network.
Power cable connects
to power supply.
1
2
3
4
DC+12V
USB
Optional null modem cable connects to
serial port on management computer.
Package Contents
Connect the following to the FortiManager system. Ensure the FortiManager system is placed on a stable surface.
It requires 1.5 inches (3.75 cm) clearance above and on each side to allow
for cooling.
•
Connect the network cable to interface 1.
•
Connect the AC Power Cord to the Power Supply.
•
Connect the Power Cord to a surge protected power bar or power supply.
FortiManager-100
02-40000-112746-20091027
QuickStart Guide
Web-based manager
The FortiManager web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and the DNS server addresses.
Requirements:
•
An Ethernet connection between the FortiManager system and management computer.
•
A web browser such as FireFox 2.0 and higher or Internet Explorer 6.0 and higher on
the management computer.
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD-ROM.
Requirements:
•
The DB9 serial connection between the FortiManager system and management com-
puter.
•
A terminal emulation application (HyperTerminal for Windows) on the management
computer.
Configuration Tools
LED
State
Description
Power
Green
The FortiManager Server unit is powered on.
Off
The FortiManager Server unit is powered off.
All Ports
Amber
The correct cable is in use and the connected equip-
ment has power.
Flashing
Network activity at this interface.
Green
The interface is connected at 100 Mbps.
Off
No link established.
Connector
Type
Speed
Protocol
Description
Port 1
RJ-45
10/100 Base-T
Ethernet
Connection to the network
Ports 2,3,4
RJ-45
10/100 Base-T
Ethernet
For future use.
CONSOLE
DB-9
9600 bps
RS-232 serial
Optional connection to the management computer. Provides access to the command line interface (CLI).
