Flylight Airsports Skyranger Swift Operator'S Manual Download

Page: 1 / 56

Skyranger Swift Operators Manual (issue 3)

Skyranger Swift Operators Manual

G_______ Serial No.: BMAA/HB/_ _ _

Approving Authority

British Microlight Aircraft Association

The Bullring, Deddington, Banbury

Oxon, OX15 0TT, United Kingdom

by delegation from the United Kingdom Civil Aviation Authority

Manufacturer

Flylight Airsports Ltd, Sywell Aerodrome, Sywell Northants NN6 0BT

This manual is approved for use with Skyranger Swift aircraft issued with a United Kingdom

type accepted (amateur-built) Permit to Fly. It must remain with the aircraft, and not be

amended or altered without authority from the manufacturer in conjunction with the BMAA

or UK CAA.

All pilots should read this manual before flying as pilot in command of the aircraft to which

it refers.

Summary of Contents for Skyranger Swift

























































Search results

Summary of Contents for Skyranger Swift

Reviews:

Related manuals for Skyranger Swift

Brands by name

Popular brands

Flylight Airsports Skyranger Swift, Operator'S Manual

Search results

Summary of Contents for Skyranger Swift

Reviews:

Related manuals for Skyranger Swift

Brands by name

Popular brands