background image

   

©2017 Flavor Burst Company                                                  Printed in August 

 

   

 

Printed in  

All Rights Reserved 

   

                               The United States of America

 

Flavor Burst

 ®

  

Jumbo Touch Panel 
 

Operations Manual* 

 

*for installation and maintenance 
information on your Jumbo Touch Panel, 
please consult your JBT system’s full 
Operations Manual.   

 
 
 
 

 
Manufactured by 
 
Flavor Burst Company 
499 Commerce Drive 
Danville, IN  46122 
 
For general information and to locate a 
distributor near you, call or visit our website: 
Phone:  (317) 745-2952 
Toll Free Number: (800) 264-3528 
Fax:  (317) 745-2377 

www.flavorburst.com

 

 
For pricing, ordering and support, contact one 
of our qualified distributors. 
 

 

 

 

 

Warranty 

 

An  installation  and  warranty  form  is  provided  with  every  Jumbo  Touch  Panel  “JBT”  system,  located 
inside  the  unit  with  this  manual.    It  is  important  that  the  operator  carefully  review  the  warranty  and 
installation documents accompanying the unit before using this system.  Any questions or concerns 
regarding the warranty should be clarified upon delivery or installation.  For more information, contact 
your local authorized Flavor Burst

 

®

 distributor. 

Summary of Contents for JBT Series












































Reviews: