1
DESCRIPTION
The NXD410TS Touch Screen User Interface provides the means to setup, monitor and display all information
from the PPC4000 and NXF4000 Control and connected accessories. The NXD410TS is a 4.3” widescreen TFT
color touchscreen. The NXD410TS is panel mounted and connects directly to the PPC4000 and NXF4000 using
cable part number 59-561 available by the foot.
Refer to Bulletin PPC-4001 for a complete description of the PPC4000 control system or for NXF4000 See
Bulletin NXF-4001.
SPECIFICATIONS
NXD410TS
Supply Voltage:
24 Vdc (18 to 30 Vdc)
Power
Consumption:
0.60A at 24Vdc (max.)
Temperature Rating:
32°F to 122°F (0°C to +50°C)
Protection Category:
Indoors use only, IP40
Unit Dimensions:
Faceplate LxH 129x88 mm
(5.1“)x(3.45“)
Cutout AxB 106.5x73.025 mm
(4.19“)x(2.875“)
allow 1.725” (43.8mm) depth clearance
Interface Method
:
RS485, 57600 Baud
Shipping Weight:
Approx. 0.9 lbs. (0.41 Kg)
NOTE
:
Proper operation of the NXD410TS Touchscreen display requires a PPC4000 with an
Engineering code of 9 or greater or a PPC4000 running main firmware revision v3.7 or greater.
Due to limitations of Modbus RTU, only one master can exist on the Modbus interface. The
NXTSD4xx Touchscreen display is considered the master of the bus and the Modbus
system should be configured such that the Touchscreen display is the only device speaking
to the PPC4000(s) on the bus.
NXDTS-4410
December 16, 2019
NXD410TS
TOUCHSCREEN
INSTALLATION GUIDE
USED WITH PPC4000 and
NXF4000 FUEL AIR RATIO
CONTROLLER
