background image

Introduction

INTRODUCTION

DEAR OWNER

THANK YOU FOR DECIDING TO BUY ONE
OF OUR NEW MOTORHOMES. WE ARE
SURE YOU WILL ENJOY MANY HAPPY
HOURS IN IT AND WE HOPE THE
INFORMATION AND HINTS IN THIS
HANDBOOK WILL HEIGHTEN YOUR
ENJOYMENT.

THE HANDBOOK HAS BEEN DESIGNED
TO GIVE YOU A GENERAL GUIDE TO THE
CARE, USE AND MAINTENANCE OF YOUR
MOTORHOME. WHETHER YOU ARE A
NEW OR AN EXPERIENCED MOTORHOME
USER THE HINTS WILL HELP TO PROTECT
YOUR INVESTMENT.

THE INFORMATION CONTAINED WILL
ANSWER MOST OF YOUR QUERIES, BUT
IF THERE ARE ANY ASPECTS WHICH ARE
NOT COVERED PLEASE CONSULT YOUR
APPOINTED DEALER.

HAPPY TOURING!

IMPORTANT - PLEASE QUOTE THE BASE
VIN (VEHICLE IDENTIFICATION NUMBER)
IN ALL CORRESPONDENCE WITH YOUR
DEALER OR SWIFT GROUP LIMITED,
THIS CAN BE  FOUND ON THE FRONT
CROSS MEMBER WITHIN THE ENGINE
COMPARTMENT AND ON THE SWIFT
MANUFACTURERS PLATE SITUATED ON
THE BULKHEAD DIRECTLY BEHIND THE
FRONT DRIVER/PASSENGER SEAT.

All the illustrations and descriptive matter in
this handbook are intended to give a general
idea of the motorhome. Changing market
and supply situations may prevent us from
maintaining the exact specification details in
this handbook. We therefore reserve the
right to alter specifications as materials and
conditions demand.

Dealers are not agents of Swift Group
Limited and have absolutely no authority to
bind Swift Group Limited by any express or
implied undertaking or representation.

Summary of Contents for X2-50 Cab





























































































































Reviews: