WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE IN
-
GROUND BENCH SEAT WITH BACK REST.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger
-
tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
2m
-
IN GROUND BENCH SEAT WITH BACK REST
(CODE No. FELIGB2)
ITEM PART
DESCRIPTION
QTY
IGBR1
SEAT FRAME
2
IGBR2
2000 mm.—SEATING PLANK
1
IGBR3
2000 mm.—
BACK REST PLANK
1
IGBR4
M6x25mm. HEXAGONAL HEAD BOLT
12
IGBR5
M6 LOCKNUT
12
Thank you for purchasing our high quality products. The In
-
ground Bench Seat with Back Rest has been well manufactured with certifieed materials to achieee high reliability and minimum mainte
nance. It is our commitment to proeide you cost
-
effectiee solutions for outdoor applications.
IGBR1
IGBR2
IGBR5
IGBR4
1
2
A.
Place the seat plank
(IGBR2)
on a flat surface and
attached it to the seat frame
(IGBR1),
by using hexag-
onal bolts
(IGB4)
and locknuts
(IGB5)
—
finger tighten.
[IGBR1]
[IGBR1]
[IGBR4x4]
[IGBR5x4]
A. Attach the back rest plank
(IGBR3)
to the top of the seat frame plate
(IGBR1),
by using hexagonal bolts
(IGBR4)
and lock nuts
(IGBR5)
-
finger
tighten
.
B. Tight both, the back rest and seat bolts with spans, wrench and /or a
proper tool.
IGBR3
[IGBR2]
[IGBR4x2]
[IGBR5x2]
[IGBR3]
[IGBR1]
P1
Hex bolt
Lock nut
Back rest
ASSEMBLED BACK REST
