DOUBLE PLANK BACK REST SPECTATOR
SEATING
PRODUCT CODE (3TGS3)
PART No.
PART NAME
QTY
3TGS1
MAIN FRAME
4
3TGS2
BACK REST FLAT BAR
1
3TGS3
4000 mm.
-
BACK REST PLANK
1
3TGS4
4000mm.
-
SEATING PLANK
6
3TGS5
M10x35mm. CUP HEAD BOLT
4
3TGS6
M6x25 mm. HEX. HEAD BOLT
104
3TGS7
M6 LOCKNUT
104
3TGS8
M10 LOCKNUT
4
3TGS9
M10 PLAIN WASHER
4
[1]
WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE DOUBLE PLANK BACK REST SPECTATOR SEATING.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
1
1
[3TGS1]
[3TSG4]
[3TGS3]
[3TGS7x4]
[3TGS1]
[3TGS1]
[3TGS2]
3
1
1
2
[3TGS6x4]
A.
Have two external frames
[3TGS1]
in place, with lugs
facing inwards and secure them
to the back and front seating
planks
[3TGS4],
by using hexag-
onal head bolts
[3TGS6]
and
locknuts
[3TGS7]
-
finger tight-
en
.
B.
STEP 2:
Install the two central
frames
[3TGS1],
and secure
them to the seating planks
[3TGS4]
, with hexagonal head
bolts
[3TGS6]
and locknuts
[3TGS7]
-
finger
tighten
(STEP2)
.
[3TGS5/6]
[3TSG7/8]
[3TGS9]
[3TGS7x4]
[3TGS1]
A.
Install the rest of the
seating planks
[3TGS4]
on the back, front and
centre as per the illus-
trated sequence
.
Make
sure to secure the
seating planks
[3TGS4]
to the frames
,
by using
hexagonal head bolts
[3TGS6]
and locknuts
[3TGS7]
-
finger tighten.
4
6
5
[3TGS6x4]
[3TGS1]
[3TGS1]
[3TGS1]
3
[3TGS7x4]
[3TGS6x4]
2
2
