1
Outdoor
1
2
1A
3
4
5
Installation Instructions for
Hodges Outdoor Post
1.0
OL13307
OL13307
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Insert the glass panels into the fixture and secure them in place using the clips.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the cover on top of the fixture and secure it using the cover screws.
Install the fixture loop to the top of the cover and secure it in place with the fixture loop screws.
6
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED
LED
lamps may be dimmed with a
dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
7
8
COVER
COVER SCREW
7
8
2
POST
POST SCREW
3
4
FIXTURE
4
LAMP
6
FIXTURE LOOP SCREWS
FIXTURE LOOP
GLASS PANEL
CLIP
5
