Limited Warranty:
This product’s limited warranty can be
found at www.fedsig.com/SSG-Warranty.
FT200C-V
Weather Resistant VoIP Hazardous Location
Telephone
25500869 Rev A0 1123
SAFETY MESSAGES TO INSTALLERS AND USERS
:
The equipment is not intended for repair by the user. Repair of this equipment shall be carried out by the manufacturer
or manufacturer’s authorised agent.
It is the responsibility of the end user to take suitable precautions to prevent exposure to aggressive chemicals that
may attack metals or the polymeric materials used in the construction of this equipment. Specific details of vulnerable
materials shall be provided in the instructions.
•
Read and understand instructions before installing or operating equipment.
•
Do not install this device near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•
Only use attachments and accessories specified by the manufacturer.
•
Refer all servicing to qualified service personnel.
•
Prior to installation, consult local building and electrical code requirements.
•
WARNING: ELECTRICAL HAZARD —
This product should be installed by a licensed electrician according to all
electrical and building codes.
•
WARNING: HAZARDOUS AREA —
Before opening the enclosure, ensure that the area is safe and that the power
conductors are not live. When replacing the faceplate, ensure that the wires or other foreign objects are not trapped
between the edges. Anything the prevents the base and the faceplate from being in direct contact nullifies the
hazardous area rating of the telephone.
•
WARNING: DISLOCATION HAZARD —
To prevent injury, this apparatus must be securely attached to the floor or
wall in accordance with the installation instructions.
•
Suitable for use in class i, division 2, groups a, b, c and d hazardous locations or nonhazardous locations only.
•
WARNING: EXPLOSION HAZARD —
Do not disconnect equipment while the circuit is live or unless the area is
known to be free of ignitable concentrations.
•
WARNING: EXPLOSION HAZARD —
Substitution of components may impair suitability for class I, division 2
hazardous locations.
•
WARNING: CHEMICAL HAZARD —
Exposure to some chemicals may degrade the sealing properties of materials
used in the sealed relay device.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death to you or
others.
