background image

EXCLUSIVE IMPORTER FOR THE UK AND REPUBLIC OF IRELAND:

FAST SYSTEM LTD.

DALTON HOUSE

NEWTON ROAD

HENLEY ON THAMES

OXFORDSHIRE RG9 1 HG

e-mail: [email protected]

TEL: 01491 419200

ENGLAND

PRECISION MADE IN TURKEY BY EKSEN A. S.

YOUR                       IS GUARANTEED FOR 1 YEAR FROM DATE OF PURCHASE. THIS

GUARANTEE COVERS ALL PARTS AND LABOUR FOR ANY REPAIRS DUE TO DEFECTS.

THE GUARANTEE DOES NOT COVER CARRIAGE, NORMAL WEAR AND TEAR OR THE

IRONING COVER AND FOAM PAD. THE                          MUST BE USED IN ACCORDANCE

WITH THE INSTRUCTIONS, DAMAGE CAUSED BY MISUSE IS NOT COVERED BY THE

GUARANTEE. IN THE EVENT OF A GUARANTEE CLAIM, CONTACT YOUR SUPPLIER

QUOTING SERIAL NUMBER AND PURCHASE DATE. THE GUARANTEE FOR THE UK AND

REPUBLIC OF IRELAND INCLUDES LIGHT COMMERCIAL USE AS WELL AS DOMESTIC USE.

CONGRATULATIONS ! YOU ARE THE OWNER OF THE ULTIMATE IN MODERN
IRONING AND PRESSING EQUIPMENT. TO FULLY ENJOY THE ADVANTAGES
OF YOUR APPLIANCE, PLEASE TAKE A FEW MINUTES TO READ ALL THE
“USE & CARE INSTRUCTIONS” AND KEEP THE INSTRUCTIONS HANDY FOR
EASY REFERENCE.

USER MANUAL AND GUARANTEE

I R O N I N G   P R E S S

press

press

ffa

asstt

Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.

Summary of Contents for Fastpress









Reviews: