IMPOR
TANT
:
Go to ww
w.extr
on.com for th
e
complete user guide and installation
instructions befor
e connecting the
product to the power sou
rce.
UHD4K 101 • Setup Guide
Overview
The Extron UHD4K 101 is a cable equalizer that actively conditions incoming HDMI signals to compensate for signal loss
when long HDMI cables, low quality HDMI cables, or source devices with poor HDMI signal output are used. It extends
Ultra High Definition (UHD) and 4K signals up to 50 feet (15 meters).
Front Panel
A
Power and signal status LED
— This LED lights amber when power is
connected and lights green when there is an active HDMI signal.
B
HDMI input
— Connect the source device to this input.
Rear Panel
A
Power input
— Connect the 12 VDC, 1 A power supply to this power
input.
Alternatively, the UHD4K 101 can draw power from the source device
over the HDMI cable but this reduces the maximum cable length (see
the table
on the next page).
B
HDMI output
— Connect the display to this output.
Installation
1.
Mount the UHD4K 101 in a suitable location. The unit should be at the end of a long cable run from the source device
and close to the output device.
The unit can be placed on a table top or, with the appropriate kit, mounted on a rack, or mounted under or through
furniture. Follow the instructions provided with the kit.
2.
Connect the source device to the input of the equalizer.
See
the table
on the following page for the maximum
cable distances.
3.
Connect the display device to the output of the equalizer.
This cable should be a maximum of 15 feet (5 meters).
NOTE:
Use the provided LockIt™ HDMI lacing
brackets to secure the HDMI connectors (see the
UHD4K 101 User Guide
at
www.extron.com
).
4.
If required, connect the power supply (provided) to the
2-pole captive screw connector.
ATTENTION:
•
Do not power on the touchpanels or control
processors until you have read the Attention in
the Power Supply section of the UHD4K 101
User Guide.
•
Ne branchez pas les écrans tactiles ou les
contrôleurs avant d’avoir lu la mise en garde
dans la section « sources d’alimentation » du
Guide de l’utilisateur UHD4K 101.
NOTE:
If all the devices are correctly cabled and powered on and you do not see an image on the display device,
you may need to buffer the DDC signal (see the
UHD4K 101 User Guide
).
HDMI IN
A
A
B
B
HDMI OUT
UHD4K 101
POWER
12V
0.2 A MAX
A
A
B
B
HD
MI
IN
HD
MI
OU
T
UH
D4
K
101
PO
W
ER
12
V
--A
M
AX
PO
WE
R
SD
CA
RD
USB
PL
AY
STA
TU
S
MO
DE
L 80
Front
REDRAY 4K Player
4K Display
Rear
Extron
UHD4K 101
HDMI Cable Equalizer
for Ultra HD
and 4K Sources
Extron HDMI Pro Series Cable
up to 50 feet (15 meters)
Short HDMI Cable
less than 15 feet
(4.5 meters)
