Extron electronics TLCA 1, Setup Manual

Page: 1 / 6

1
TLCA 1 Adapter • Setup Guide
Overview
The TLCA 1 is a TouchLink Control Port Expansion Adapter that provides multiple
control port options including an IR port, Digital Input port, two Communication
ports, and two Relay ports; transforming your wall mount, tabletop, and Cable
Cubby TouchLink Pro touchpanels into a powerful, all-in-one control system. This
innovative tool adds flexibility and power to our latest TouchLink Pro touchpanels,
including the TLP Pro 525 Series, TLP Pro 725 Series, TLP Pro 1025 Series and
TLP Pro 300M.
NOTE:
The TouchLink Pro touchpanel must have a LinkLicense for TLP Control
Processor, purchased separately and applied via Toolbelt, prior to using TLCA 1.
What is Included
1
2
1
USB adapter — micro B to USB A connector.
2
Mounting Clip — for tabletop and Cable Cubby
installations. Includes four #6 screws.
Figure 1. USB adapter and Mounting Clip
TLCA 1 Features
RELAY
1 2 C
COM2
G Tx Rx
COM1
Tx Rx
IR/D IN
S G IN
B c
D E
A
s
F
Figure 2. TLCA 1 Adapter — Top View Figure 3. TLCA 1 Adapter — Front View
A
USB connector —
•
Insert the micro B connector into the micro B port of the 525M, 725M, 1025M and 300M wall mount models, or
•
Use the included USB adapter (see figure 1 , 1 ) for TLCA 1 use on 525T, 725T and 1025T table top models, or 525C
and 725C Cable Cubby models.
B
IR Output port (shares the ground pin with Digital Input )
C
Digital Input port (shares the ground pin with IR port )
D
3-pole COM ports (two, with shared ground wire)
E
Relay ports
(two, with shared common wire)
F
Power LED indicator — provides the power status of the adapter
Fig 2 A-E
figure 1