Warnings and
Safety Instructions
Use charger indoors only. Do not expose charger to rain, snow, or
excessively damp/moist environments such as bathrooms,
greenhouses, or saunas.
Before use, check for and remove all debris (if present) from the
alligator clips and battery terminals. Be sure that both charger and
battery pack are free of damage.
Do not open charger casing or operate it after tampering with it’s
internal components. Do not use charger if the wires are frayed or
internal components are exposed.
To reduce risk of malfunction, use of an attachment is not recom-
mended. If you wish to use one; follow the instructions provided
by the attachments’ manufacturer.
Do not operate with an extension cord unless absolutely
necessary.
To use one follow the directions below. Improper use
can result in malfunction or property damage.
If you suspect that the charger has been damaged due to water
damage or being dropped do not operate!
NEVER charge a frozen
or extremely hot battery.
Do not leave charger operating longer than it takes to charge
desired battery pack. Never leave the charger plugged in after
charging your battery pack.
To reduce the risk of damage
follow the charging conditions
approved by your batteries’ manufacturer. Doing so will keep your
battery safe and extend it’s life.
Read all instructions before use. If charger is damaged or wet
do not use it! Save these instructions for future reference.
Use with 24V LiFePO4 Rechargeable Battery pack only.
Make sure the pins on extension cord match the ones on the charger.
Make sure both wall socket and extension cord are not damaged.
Extension cord must be the same AC ampere rating of charger.
Plug extension cord directly into a working AC wall socket.
Warnings
Keep out of reach of children. Battery and or Charger can become
hot-to-the-touch.
Remove metal objects such as rings before operating the charger.
Operate on a flat heat resistant surface in a cool area with good
ventilation.
In the rare case of sever malfunction,
shut power off from
breaker. If safe to approach use protective hand gear to prevent
shock or burns. Otherwise, use fire extinguisher if possible or
contact the appropriate local emergency services.
Contact our support team for any questions, operation safety, or
more information.
Contact information on the other side.
Recommended Precautions
RISK OF SHOCK
Be aware of metal objects and possible contact with skin when operating.
Use product properly. Do not leave plugged in after charging is complete.
Insure flammable debris/materials are not near or obstructing components.
RISK OF EXPLOSION
RISK OF FIRE
SMART CHARGER
LiFePO4
Specifically Made for
LiFePO4 Batteries
Intelligently Programed
Efficiently Easy
BMS Compatible
Specifications
24V 5A
EPC245
Weight: 0.9 lbs
Dimensions: 6 x 2.75 x 1.75 in
CHARGE
CHARGE OK
STATUS DISPLAY
2.75 in
1.75 in
6 in
CHARGE
CHARGE OK
STATUS DISPLAY
Smart Charger Components
XLR Connector
With 46 in Cord
CHAR
GE
CHAR
GE OK
ST
ATUS DISPLA
Y
LED Indicator
3.3 ft AC Cord
Smart Charger
Inline Connector
With 20 in Cord
