![background image](http://html1.mh-extra.com/html/exped/scout-tarp-extreme/scout-tarp-extreme_instructions_2451610001.webp)
INSTRUCTIONSSCOUTTARPEXTREME2210
|
Copyright Exped AG, Switzerland
TIPS AND TRICKS
Before leaving on your next adventure, check that your
tarp is complete and free of damage.
To secure the pegs in loose earth, sand or snow, wrap
the tarp cord around the center of the peg and bury it
horizontally. You can also use the packsack filled with
sand or snow, or use the Exped Snow and Sand Achors
available separately.
Never light a stove in a tarp as it is a fire hazard.
The seams of a silicone coated tarp fly cannot be factory
seam taped. For water resistance a special cotton wrap
polyester core thead is used. This thread expands when
wet, sealing the stitch holes. Should this not be enough, a
special silicone seam sealer can be applied (e.g. Seamgrip
SIL by McNett).
A sandy or dirty tarp is best sprayed down with a water
hose and a sponge. Do not machine wash.
Dry and air your tarp thoroughly prior to storage. This
process may take a couple of days. Store the tarp in
a dry area away from direct sunlight.
INSTRUCTIONS
SCOUT TARP EXTREME
ENGLISH
3
1
2
4
5
ABBAU
1
Remove all pegs and
release the cords.
The pegs are stored in the
accessory bag.
2
Store the guylines in
the Cord Stuffsacks.
Simply insert three fingers
into the Cord Stuffsack,
wrap the tent cord around
your fingers and then turn
the stuffsack inside out
like with a pair of socks.
3
Now stuff the tarp into
the packsack.
REFINED GEAR FOR ADVENTURE