background image

B E N E F I T S

A P P L I C A T I O N / S I Z I N G

I N S T A L L A T I O N T I P S

O P E R A T I O N T I P S

Kleenware HTS-11 System

Scale prevention and corrosion control for warewashing equipment

Kleenware HTS-10 System: EV9799-10

Scale control system features HydroBlend which

inhibits mineral deposits and provides corrosion

protection

Extends the life of expensive foodservice

equipment

Opaque (red) high temperature bowl 
allows for hot water (up to 200°F) feed 

installations

Transparent replacement cartridge containing

HydroBlend scale inhibitor, which is effective 

up to 200°F

Specially designed flow through head assures

consistent, predictable product feed rates

The HTS-11 system must be used as a unit (i.e.

high temperature bowl, head and cartridge)

Install vertically using the mounting bracket

provided

Use 3/4” water line and observe proper

inlet/outlet water directions

Some pressure relief mechanism should be

provided downstream of the system to permit

releasing line pressure when changing cartridges

Deliming of equipment prior to installation is

recommended, but not required

Inspect HT-10 cartridge at least every 6 months

for replacement

Pre-existing equipment scale may be dislodged

and settle to the bottom of a chamber which can

clog drain initially. Remove any settled scale

In new installations, the HydroBlend usage rate

may start high, but will be reduced as existing

scale is removed

Replace HT-10 cartridge before HydroBlend™

compound is completely used up

Commercial dishwashers

Commercial glassware washers

Warewashing booster heaters

EV9799-11

HT-10 Replacement Cartridge: EV9799-22

Kleenware HTS-11 System: EV9799-11

Reviews: