background image

ENGLISH VERSION 

 

Europe distribution: Nigor Net B.V., Amsterdam, The Netherlands    

T

+31 20 5818-550  

F

+31 20 5818-559  

E

 

[email protected]

  

U

 

www.eurekaeurope.com

 

 

 

 
User instructions: 

 

Solar Shade

 

 

Directly after purchase 

 

1. Do a trial-set up of your tent.  

Please set up your tent prior to your first trip to ensure you are familiar with the 
setup and the tent is in proper condition.  

 

Assembly 

1.

 

Unroll and unfold the shelter and lay it on the ground with the windows 
facing up.  

2.

 

Assemble the shockcorded poles. Try to prevent pole sections from 
snapping together, as this can damage the pole ends. Make certain each 
insert has seated firmly into each plain end. 

3.

 

Slide the long pole through the sleeve, across the top of the tent. Push the 
pole don’t pull it. Continue until you reach the grommet on the other side 
of the tent. Insert the post at the end of the pole into this grommet. 

4.

 

Move back to where you started at the opposite side of the shelter. With the 
pole in one hand and web/grommet in the other, feed the pole up. Take 
care that the ferrules do not get caught on the sleeves. Push the pole evenly 
along its length to create an arch. Place the post end of the pole into 
grommet to maintain tension across the top of the shelter. 

 
 
 
 
 
 
 

5.

 

Lift the top of the shelter. Push one of the short poles through a sleeve and 
down to a web/grommet at the base. At the top of the shelter, insert the post 
into the grommet. Repeat with the second pole into the last sleeve. 

6.

 

Move to the base of the shelter. With a pole in one hand and 
web/grommet in the other, push the pole evenly along it’s length to 
create an arc. Place the post into the grommet to maintain tension 
across the fabric. Repeat with the second pole.  

7.

 

Your shelter is now freestanding. Move it to the desired location 
and secure. Since soil conditions vary greatly, we have included 
two methods to secure the shelter: 

1.

 

On sand. Fill the four bags with sand and tie them to the 
four corner webs. Pull the bags out and away from the 
shelter until the floor is taut. Bury the bags in the sand. 

2.

 

On Turf. Drive a stake through the grommet on a corner 
web . Work your way around the shelter squaring and 
staking the base as you go. 

Tent care 

 

We strongly advise you to read the 

Eureka! Tent Care Leaflet 

(included in 

the peg bag) before first use!! 

 

 

Floor protection

: We recommend the use of a thin groundsheet or floor 

saver with any tent for added protection from abrasion. The floor saver 
should be about 10cm. (4 inches) from the tent edge to avoid the 
possibility of channelling water beneath the tent. 

 

Damaging substances

: Fuels can damage tents as can DEET found in 

many insect repellents. 

 

Exposure to sun

: The sun’s UV rays can be harmful even with technical 

advances in fabrics. Prolonged exposure could result in fading and 
possibly fabric disintegration. Do not leave a tent up longer than 
necessary. 

 

Cleaning

: Clean tent fabric, poles and zippers with lukewarm, clean 

water after every use. Never use detergents, washing machines or 
dryers (also see warranty leaflet).

 

 

 

Tent storage:

 It is important that you store the tent in a dry and cool 

condition. If you put the tent away in the carry bag while it is wet, even 
for a short time, it may become affected by mildew, which can damage 
the coating. 

 

Seams

: All major seams are factory taped. Over time seams could 

experience delamination. Simply clean the seam and apply seam sealer 
that can be purchased at most outdoor stores. 

 

Optional Eureka! accessories

 

Reviews: