Model:
PERLED20
20W LED Perimeter Light
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
AND RETAIN FOR FUTURE REFERENCE
INSTALLATION INSTRUCTIONS
A guide for qualified electricians
874/2012
MODELNO.
PERLED20
EVENTUALLY, YOU MAY WANT TO
REPLACE THIS PRODUCT:
Regulations require the recycling of Waste from
Electrical and Electronic Equipment (European
“WEEE Directive” effective August 2005—UK
WEEE Regulations effective 2nd January 2007).
Environment Agency Registered Producer: WEE/
GA0248QZ.
WHEN YOUR PRODUCT COMES TO THE END OF
ITS LIFE OR YOU CHOOSE TO REPLACE IT, PLEASE
RECYCLE IT WHERE FACILITIES EXIST - DO NOT
DISPOSE WITH HOUSEHOLD WASTE.
CLEANING:
Disconnect the power and clean the exterior only of
this fitting with a moist (not wet) cloth.
Do not use any chemical or abrasive cleaners.
IF YOU EXPERIENCE PROBLEMS:
If you believe your product is defective, please return
it to the place where you bought it. Our Technical
Team will gladly advise on any Eterna Lighting
product, but may not be able to give specific
instructions regarding individual installations.
Pack contents:
20W perimeter LED light with
IP rated wiring connection box
and wall mounting bracket
LAMP SPECIFICATIONS:
Lumens total flux
1800 lm
Rated Wattage
20W
Rated luminous flux
1800 lm
Nominal life time of the lamp
25,000 hrs
Colour temperature
3000K
Number of switching cycles
before premature lamp
failure
20,000
Warm-up time up to 60 % of
the full light output
Instant full light
Dimmable
No
LED strip dimensions (L/W)
270 x 60mm
Nominal beam angle
160°
Rated power
20W
Rated lamp lifetime
25,000 hrs
Lamp power factor
0.85
Lumen maintenance factor at
end of nominal life
70%
Starting time
<0.5s
Colour rendering
>80
Colour consistency
Within 6 step
Macadam ellipse
Rated peak intensity
540cd
Rated beam angle
160°
Voltage
240V
Email: [email protected] / [email protected]
Visit our website:
www.eterna-lighting.co.uk
Made in China
Issue 1016
