![background image](http://html.mh-extra.com/html/etc/unison-paradigm-p-lcd-fbb/unison-paradigm-p-lcd-fbb_installation-manual_2431794001.webp)
E T C
®
I n s t a l l a t i o n G u i d e
Unison Paradigm Wall Mount Touchscreen
.
c
n
I
,
sl
o
rt
n
o
C
e
rt
a
e
h
T
ci
n
o
rt
c
el
E
4
f
o
1
e
g
a
P
n
e
e
r
c
s
h
c
u
o
T
t
n
u
o
M
l
la
W
m
gi
d
a
r
a
P
n
o
si
n
U
Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT Via Ennio Quirino Visconti, 11, 00193 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0)20 8896 2000
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service: (Americas)
(UK)
(DE)
(Asia)
Web:
www.etcconnect.com
Copyright © 2008 ETC. All Rights Reserved. Product information and specifications subject to change.
7184M2100 Rev A Released 11/2008
ETC intends this document to be provided in its entirety.
Overview
The Unison
®
Paradigm™ Wall Mount Touchscreen uses a high-resolution, 7”-wide screen, color
liquid-crystal display (LCD) that is bright and easy to read, with controllable back lights. The
Touchscreen is installed in a flush mount backbox or a surface backbox, which is shipped separately.
The Touchscreen is also available in rack mount and locking cover configurations. The Touchscreen is
powered by either LinkPower and Auxiliary power or PoE (Power over Ethernet 802.3af).
•
Echelon
®
LinkPower
®
(LinkConnect) control network utilizing Belden 8471 (or approved equal)
and 24 Vdc Auxiliary power (two 16 AWG 1.5mm
2
) wires.
•
PoE (Power Over Ethernet 802.3af) utilizing Category 5 cable (or approved equal).
All control wiring should be installed and terminated by a qualified installer and should follow standard
wiring installation practices. Leave approximately 10 inches (254mm) of wiring in the backbox for
connection and to allow slack for future service needs. For more information about terminating Cat5
cable, refer to the
ETC Ethernet Cat5 Termination Kit Setup Guide
.
Installing the Backbox
Installation should follow local codes and standard practices. Ensure that the backbox is clean and free
of obstructions. Ensure that all wiring is installed correctly. The touchscreen is supplied with an
installation kit which includes hardware and electrical supplies for most applications.
Flush Mount Backbox
The hole in the wall should be cut carefully so there are no gaps around the box. The installation kit
includes two lengths of screws for depth adjustment and screws for securing the collar.
Surface Mount Backbox
Do not use the depth adjustment screws in the surface mount backbox. Use the M4 mounting pan head
screws to attach the collar to the surface mount backbox. Refer to the instructions for the flush mount
backbox above.
Paradigm Wall Mount Backboxes
n
o
it
p
ir
c
s
e
D
l
e
d
o
M
P-LCD-FBB
Paradigm Touchscreen flush mount backbox
P-LCD-SBB
Paradigm Touchscreen surface mount backbox
N o t e :
A special trim ring is available to cover any excess rough-in gap. Contact ETC or
your ETC Dealer for availability.
M3 depth
adjustment
screw
M4
mounting
screw