Operating instruction
Hydraulic system with Motor drive PXD compact
Document no.: B-00021
Edition 2019 09
Operating instruction EN
Copyright by Ergoswiss AG
1/25
Operating instruction - Motor drive PXD compact
to control and drive hydraulic lifting systems made by Ergoswiss AG
It is essential to read this operating instruction thoroughly before commissioning the system.
This operating instruction has to be stored in the immediate vicinity of the system.
Power cable
Control box compact-3-eco
Manual control switch Memory
Motor cable PXD
Motor PXD with front plate and housing PXD
Cable strain relief
PXD coupling for connection to the Ergoswiss
hydraulic pumps type PA, PB and PF (with Woodruff key)
Errors and technical changes reserved.
Ergoswiss AG does not assume any liability for operating
errors or using the products outside of the intended
purpose use.
At the time of delivery Ergoswiss AG will replace or re-
pair defect products within accordance with the warran-
ty provisions. In addition, Ergoswiss assumes no other
liability.
For your questions and special custom demand
Ergoswiss AG will be at your disposal.
Ergoswiss AG
Nöllenstrasse 15
CH-9443 Widnau
Tel.: +41 (0) 71 727 06 70
Fax: +41 (0) 71 727 06 79
[email protected]
www.ergoswiss.com
1
3
5
2
7
4
6
