yi6503
revision A, 2017-02-24
Sentinel 150 series
Automatic switch mode battery chargers
Installation, Operation and Maintenance
This Manual Refers to the Following Models
Standard models
UL recognised/listed models
Open frame
models
SNTL1501205CDxx
SNTL1502405CDxx
SNTL1501210CDxx
SNTLUL1501205CDxx
SNTLUL1502405CDxx
SNTLUL1501210CDxx
Enclosed
models
ESNTL1501205CDxx
ESNTL1502405CDxx
ESNTL1501210CDxx
ESNTLUL1501205CDxx
ESNTLUL1502405CDxx
ESNTLUL1501210CDxx
ESNTLUL1501210CDxxNFPA
Note: “xx” above refers to battery type options specified on order: see pages 3 and 6 (DC Output calibration) for battery types/voltages.
For safe and correct use of these chargers, read and save the safety
information that precedes the installation and operation instructions.
This guide contains 8 pages (including this one). If any pages are missing,
contact the battery charger supplier or manufacturer for replacement
documentation.
Sentinel 150 (open-frame, with protective cover)
SNTL150 model shown
Enclosed Sentinel 150
ESNTLUL150 (left) and ESNTLUL150xxNFPA (right) models shown
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time. MURPHY products and the Murphy
logo are registered and/or common law trademarks of Enovation Controls LLC. This document, including textual matter and illustrations, is copyright protected by Enovation Controls Ltd.,
with all rights reserved. © 2017 Enovation Controls Ltd. A copy of the warranty may be viewed or printed by going to
http://murphybyenovationcontrols.com/warranty
To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]
