background image

ENFORCER Wireless Video Door Phone 

16

 

SECO-LARM U.S.A., Inc. 

 

 

 

 

Additional Monitor 

Additional Camera 

2-Wire Hands-Free 

Video Door Phone 

 

 

 

DP-266-M3Q DP-266-CQ  DP-234Q 

 

 

 

2-Wire Color 

Video Door Phone 

Wireless Intercom 

CBA

®

 Wireless 

Alert System

 

 

 

 

 

DP-222Q DP-T100-2Q 

RA-4961-K1Q 

 

Also Available from 

SECO-LARM

®

:  

SECO-LARM

 

®  

U.S.A., Inc.

 

16842 Millikan Avenue, Irvine, CA 92606 

Website: www.seco-larm.com 

Phone: (949) 261-2999  |  (800) 662-0800  Email: [email protected] 

®

 

PICKN1 

 

MI_DP-266-1C3Q_180628.docx 

NOTICE:  The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM 
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks 
are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2018 SECO-LARM U.S.A., Inc.  All 
rights reserved.  

WARRANTY:

 

This SECO-LARM product is warranted against defects in material and workmanship while used in normal 

service for one (1) year from the date of sale to the original customer. SECO-LARM's obligation is limited to the repair or 
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if 
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, 
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment 
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of 
SECO-LARM and the purchaser's exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM's 
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property 
damage of any kind to the purchaser or anyone else. 

IMPORTANT:

 Users and installers of this product are responsible for ensuring this product complies with all national, state, and local 

laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this 

product in violation of any current laws or statutes.

 

FCC COMPLIANCE STATEMENT 

DP-266-M3Q FCC ID:  K4E266M3Q 

DP-266-CQ FCC ID: K4E266CQ

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the 

equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 

generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

  

® 

 

 

 

DP-266-1C3Q 

Wireless Video Door Phone 

Manual 

Features: 

 

 

Wireless operation – camera and monitor can 
operate from up to 492ft (150m)** away 

 

Remotely and securely talk to visitors and 
unlock doors or gates via the monitor 

 

Lightweight monitor can be carried around the 
premises while talking to the visitor 

 

Connect up to two additional monitors and one 
additional camera* 

 

Intercom calling between paired monitors* 

 

Camera has built-in IR LEDs for nighttime 
operation 

 

Camera includes a built-in PIR sensor that 
activates the camera and takes photos of the 
visitor when they approach 

 

Monitor includes a kickstand and a charging base 

 

Camera powered by 9~16 VAC/5~16 VDC 

 

Monitor front door at any time 

 

Egress input 

 

170° wide field of view 

 

Adjustable camera pan and tilt angle—up to 20° 
from centerline in any direction—to allow for 
mounting variations 

*Additional monitors and camera sold separately. 
**Line-of-sight range. Actual range may vary depending on the installation and operating environment. 

Summary of Contents for DP-266-CQ









Reviews: