C - During the selection feature, press the dimming button to choose one of 10 different light
levels.
Strobe Selection Feature
By pressing the Strobe button, the lights will strobe through all of the colors in a random pattern.
Fade Selection Feature
By pressing the Fade button, the lights will fade in and out through all of the colors in a random
pattern.
Modes Selection Feature
Press the “modes” button repeatedly to cycle through the following preset modes:
•Twinkle
•Multi Fade
•Christmas
•St. Patrick’s Day
•Red, white and blue
•Fall •Spring
•Multicolor
Timer Selection Feature
A - By pressing the 2 Hour Timer button, you will activate a two-hour countdown until lights turn
off.
B -
By pressing the 4 Hour Timer button, you will activate a four-hour countdown until lights turn
off.
10 - Once you have customized your settings and are ready to power off your lights, press the
red ON/OFF button located at the top of the remote.
NOTE:
Your Café Lights will automatically remember the last customized settings and
will turn back on in the same mode and/or color scheme.
INSTALLING MULTIPLE CAFÉ LIGHT SETS
Extend the length of your lights by connecting more than one strand together to form one
continuous string up to 750 feet! Simply follow the above installation steps, making sure each
connection between strands is secure and that the end female receptacle is securely covered using
the receptacle cover.
To pair an Enbrighten pairable remote with Enbrighten Seasons Café Lights or landscape lights,
follow the below instructions:
1) Plug in (or supply power) to the lights and within 8 seconds press and hold the remote’s ON/
OFF button. The lights will turn white, blink once and remain white. Your remote and lights are
now paired.
a) Please note you can pair a remote with as many Enbrighten Seasons Lights as you
desire
b) Multiple strings can be paired at one time with one remote, by suppling power to
multiple strings at once, then pressing and holding the ON/OFF button within 8
seconds of power on, per the above instructions.
2) Lights can be paired with up to 8 remotes.
If you wish you can remove a remote control
from memory of a light (unpair) follow the below instructions:
a) Plug in (or supply power) to the lights and within 8 seconds, press and hold
the yellow button (in bottom left corner). The lights will turn white, blink twice and
remain white. Your remote and lights are now unpaired.
b) Multiple lights can be unpaired at one time from
one remote by suppling power to multiple lights
at once, then pressing and holding the yellow
button within 8 seconds of powering on.
REMOVING CAFÉ LIGHTS
1 - Always unplug Café Lights from their receptacle prior to
removing.
2 - Carefully remove each light individually from the
mounting hardware.
NOTE:
For your safety, never pull or jerk lights from mounting hardware.
3 - Store lights in a dry location.
Congratulations on your recent purchase of Enbrighten Café Lights. Enbrighten
Café Lights are designed to provide lighting for life with no bulbs to replace ever
again! Purchase additional lights to form one continuous string up to 750 feet!
IMPORTANT:
Before installation, please read all the warning statements included at the bottom of
these instructions.
In order to ensure proper installation, please follow each step below:
INITIAL SETUP
1 - Carefully unpack Café Lights from box. Remove the wire ties.
2 - When installing Café Lights outside, a Ground Fault Circuit Interrupter (GFCI) receptacle must
be used. Before installing, plug the Café Lights into the GFCI receptacle to ensure all lights
work properly.
IMPORTANT:
Unplug the Café Lights prior to mounting.
INSTALLING CAFÉ LIGHTS
1 -
IMPORTANT:
Only mount Café Lights to a solid support structure such as joists, beams, studs
or other solid mounting surfaces.
2 - Each Café Light is designed with a universal keyhole for mounting
with lights hanging downward. Hardware options include screws,
nails, zip ties, hooks and more (not included).
3 - Use keyhole ear tabs or keyholes to mount power supply.
4 - Guide wires in compliance with local electrical and building codes
may also be used to support Café Lights.
5 - Once appropriate GFCI outlet location, mounting surface and
hardware are determined, mount your Café Lights.
6 - When finished mounting, place the female receptacle cover firmly
over the unused outlet and plug the male plug into the GFCI Receptacle.
7 - Locate the remote. Remove the back cover of the remote and insert two AAA batteries
(included) into the empty compartment. Be sure to note polarity. Do not mix old and new
batteries. Firmly replace the back cover.
NOTE:
Your Enbrighten Seasons Café Lights will come automatically paired with
its remote.
8 - To power on your Café Lights, press the red ON/OFF button located at the top
of the remote.
NOTE:
Keep remote indoors when not being used. Remote is not
waterproof.
9 - Now that your lights are installed and powered on, take time to explore the
following settings that are programmable via your remote:
Single Color Selection Feature
Find your favorite color on the remote’s color pad and simply push that button to
set all of the lights the same color.
NOTE:
Within this feature, you can also press the dimming button to
adjust from 10 different light levels. The dimming option is only available for
single- and dual-color selection.
Dual Color Selection Feature
A - Press Color 1, then select a color from the color pad to set the color of every other bulb
starting with the first bulb.
B - Press Color 2, then select a color from the color pad to set the color of every other bulb
starting with the second bulb.
Keyhole Ear Tabs
Keyholes
2
3
/
8
in / 6cm
Enbrighten Café Lens Shade
Stainless Steel
Model #35917
Enbrighten Café Lens Shade
Oil-Rubbed Bronze
Model #35877
Express your unique
style with a variety of
shapes and finishes
of Enbrighten Café
decorative shades.
Express your
unique style with a
variety of shapes
and finishes of
Enbrighten Café
decorative shades.
Simplify your Café Light experience by automating your on and off times and add a decorative shade to
give your lights a distinctive style.
We recommend the following models, available at your select retailers or at
www.cafelights.com
:
See below for electrical rating
Available in multiple lengths at
www.cafelights.com
Length, feet
Bulbs
Model Number
36632
18
36
37790
24
48
37791
12
24
Input watt, Max. Location Use
Wet
Model No.
RGB /*/12/*/*
RGB /*/18/*/*
RGB /*/24/*/*
10W
15W
19W
GE Bluetooth Outdoor
Smart Switch (Plug-in)
Model #13868
myTouchSmart Outdoor
Timer (Plug-in)
Model #26898
myTouchSmart
Timer (In-Wall)
Model #26893
GE Bluetooth
Smart Switch (In-Wall)
Model #13869
Wirelessly schedule and
control outside lights or
other devices from your
smartphone or tablet.
The myTouchSmart
plug-in timer is the easiest
to set timer on the market.
Simply select your time
and go.
The myTouchSmart
In-Wall Timer provides
easy-set controls if your
receptacle is controlled
by a switch.
The GE Bluetooth In-Wall
version provides the
same Bluetooth control
if your receptacle is
controlled by a switch.
Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and the product registration information.
WARNING:
When using outdoors use portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and
personal injury, including the following:
a) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location portable luminaire.
Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
b) Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW,
SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.
WARNING:
Keep these bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film may cling to nose and mouth and
prevent breathing.
NOTE:
Ensure the Café Light’s receptacle cover is firmly installed and well seated when not being used to connect additional strings.
Warranty Information:
This Jasco product is warrantied for three (3) years with a limited-lifetime replacement warranty on Enbrighten LED light source only.
RISK OF ELECTRIC SHOCK
• RECEPTACLE OUTLETS USED FOR POWERING
CAFÉ LIGHTS SHALL COMPLY WITH ALL NATIONAL
AND LOCAL ELECTRICAL CODES. CONSULT
LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE
REQUIREMENTS.
• FOR USE ONLY ON GFCI PROTECTED CIRCUITS.
• DO NOT SUBMERSE.
• DO NOT USE AROUND AQUARIUMS.
• CAFÉ LIGHTS ARE A WET LOCATION PRODUCT AND
HAVE NO SERVICEABLE PARTS.
• DO NOT USE WITH EXTENSION CORD NEAR WATER
OR WHERE WATER MAY ACCUMULATE.
• KEEP LAMPS AT LEAST 16 FEET FROM POOLS AND
SPAS.
• KEEP PLUGS AND RECEPTACLES DRY.
• AVOID DAMAGE TO THE CORDS AND LAMP
ASSEMBLIES DURING INSTALLATION. PERIODICALLY
INSPECT THE CAFÉ LIGHTS FOR PHYSICAL DAMAGE
OR OTHER DAMAGE CAUSED BY OUTDOOR
EXPOSURE TO THE ELEMENTS.
• REPLACE ANY DAMAGED CAFÉ LIGHT STRINGS.
• DO NOT INSTALL IN LOCATIONS WHERE CAFÉ
LIGHTS CAN BE STEPPED ON.
• ENSURE CAFÉ LIGHTS ARE UNPLUGGED FROM
POWER DURING INSTALLATION.
• CAFÉ LIGHTS SHOULD BE INSTALLED OUT OF THE
REACH OF CHILDREN OR NOT ALLOWING CHILDREN
TO PLAY WITH THEM.
• UL RECOMMENDS TESTING GFCI CIRCUITS AND
RECEPTACLES EVERY MONTH TO ENSURE PROPER
OPERATION.
• DO NOT OPERATE WITHOUT BULB SECURELY
SCREWED IN.
RISK OF FIRE
• CAFE LIGHTS ARE DESIGNED TO BE
MOUNTED WITH THEIR INDIVIDUAL
KEYHOLE MOUNTING FEATURE, DO NOT
MOUNT CAFÉ LIGHTS BY USING THE MAIN
ELECTRICAL CORD OR THE INDIVIDUAL
DROP CORDS.
• CAFÉ LIGHTS ARE DESIGNED TO BE
LINKED BY USING THEIR ELECTRICAL
PLUGS AND RECEPTACLES TO A
MAXIMUM DISTANCE OF 750 FEET.
• CAFÉ LIGHT INTERCONNECTING
RECEPTACLES ARE INTENDED ONLY
FOR THE LINKING OF COMPATIBLE CAFÉ
LIGHT STRINGS. DO NOT USE CAFÉ
LIGHT RECEPTACLES FOR ANY OTHER
ELECTRICAL PURPOSE.
• DO NOT MOUNT CAFÉ LIGHTS IN ANY
POSITION WHERE THE BULB IS FACING
UP.
• DO NOT ALLOW THE LED LAMP
ASSEMBLIES TO BE IN CONTACT WITH
COMBUSTIBLE MATERIALS. LED LAMP
ASSEMBLIES SHOULD HANG FREELY AND
NOT BE SUSCEPTIBLE TO REPETITIVE
DAMAGE CAUSED BY ENVIRONMENTAL
CONDITIONS SUCH AS WIND, RAIN, AND
ICE.
• NOT INTENDED FOR INSTALLATION IN
CEILINGS, SOFFITS, CABINETS, ATTICS, OR
OTHER ENCLOSED SPACES.
• BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS
OR EXPLODE CAUSING INJURY AND PRODUCT DAMAGE.
• DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES.
• REPLACE ALL BATTERIES AT THE SAME TIME.
• REPLACE EXHAUSTED BATTERIES IMMEDIATELY.
• REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR EXTENDED
PERIODS OF TIME.
MADE IN CHINA
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 3-year limited
warranty. Visit www.byjasco.com for warranty
details.
Questions? Contact us at 1-800-654-8483
between 7:00AM—8:00PM CST.
Patents pending | www.cafelights.com
Electrical Ratings
Input: 120 V, 50/60 Hz
Important — please read:
WARNING
CAUTION
Version 5
4/9/18
This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1 this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Requires 2AAA* batteries.
Observe polarity markings (+), (-).
Seasons
SAVE THESE INSTRUCTIONS
