ww
w.emsg
roup
.co
.uk
Radio D
etec
tor Base
PRESS HERE T
O
L OG ON
IDENT
ww
w.emsg
roup
.co
.uk
Radio D
etec
tor Base
PRESS HERE T
O
L OG ON
IDENT
w
w
w
.emsg
r
oup
.c
o
.uk
R
adio D
et
ec
t
or Base
PRESS
HERE T
O
L
OG ON
IDENT
63mm
©2015 EMS Security Group Ltd. All rights reserved Page 1 of 2 TSD044 Iss 11 09/02/2016 AJM
1
Pre Installation
4 Power Device
To unlock, insert a 1.5mm
Allen key into the Allen
key slot and turn
anticlockwise as shown.
3 Fix Mounting Plate
2
Components
device
unpowered
(pins unlinked)
device
powered
(both pins linked)
!
Installation must conform to applicable local installation
codes and should only be installed by a fully trained
competent person.
Ensure that the device is installed as per the site survey.
The use of a non-metallic spacer should be considered if
mounting the device on to a metal surface.
Do NOT Press the Log On button on a pre-programmed
device, as this will cause communication with the Control
Panel to be lost. Should this happen, delete the device from
the system and add it back on.
Detector
Wireless Module
Mounting Plate
2
3
Remove the mounting plate from the wireless module by turning
it anticlockwise.
4
5 Optional Device Locking
6 Configuration
To lock the detector into
the wireless module,
insert a 1.5mm Allen key
into the allen key slot and
turn clockwise as shown.
Use both mounting holes to ensure a firm fixing.
Use suitable fasteners and fixings.
Once powered, reassemble the device.
The device’s loop address is configured within the menu structure
of the Radio Hub.
Refer to the programming manual (Doc Ref: MK98) for full
programming information.
Free to download from
www.emsgroup.co.uk
Wireless Detector
Installation Guide
FCX-170-001
Wireless Detector Base Only
[3]
FCX-175-001
Heat A1R Detector Only
[1]
FCX-176-001
Heat CS Detector Only
[1]
FCX-177-001
Optical Smoke Detector Only
[2]
Example shown:
FCX-177-001
FCX-170-001
Part No Product Description
See the Specification section for compliance information.
CPR
SIZE AA
SIZE AA
SIZE AA
SIZE AA
SIZE AA
SIZE AA
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
2
4
3
1
Dust Cover
1
When fitting / replacing batteries; observe correct polarity,
using only specified batteries.
Connect the power jumper across the PIN header.
www.emsgroup.co.uk
Radio Detector Base
PRESS HERE TO
LOG ON
IDENT
