Q
Q
u
u
i
i
c
c
k
k
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
G
G
u
u
i
i
d
d
e
e
Important Information
- For more detailed information, please visit our website at http://www.btc.com.tw/ to download and install the “MouseMaestro Input
Device Driver” to enjoy the full potentiality functions of the mouse
.
- If you want to display Help file to get more usage information, please refer to the following steps:
1.
After driver installation, please click the driver icon
at the right-bottom in the Windows system tray.
2.
Click the Help button on the left-bottom of the driver Configuration dialog box and the help file will pop up.
System Requirements
-
Microsoft® Windows® 98SE, Windows® ME, Windows® 2000 or Windows® XP operating system
-
CD-ROM drive (for CD and Video operation)
-
Standard sound card (for CD and Video operation)
-
Microsoft® Office 97 or later version
-
Microsoft® Internet Explorer 5.0 or later version (for the Internet keys)
-
Available USB port
Hardware Installation
1.
Plug in the dongle receiver connector into your available USB port on PC.
2.
Please push the top pad of the mouse to open the battery compartment. Make sure the batteries of the mouse are installed
correctly, please follow the polarity signs in the battery compartment.
3.
Please make sure the slide switch on the back of the mouse is switched to “on” before using the mouse. When not in use,
please turn the slide switch to “off” for power saving.
(--)
(+)
(+)
(--)
C
onnect Button
Power Switch
Pairing Procedure
The wireless mouse can operate out of the box immediately after you plug the receiver USB connector into your PC USB port. If it can’t
work, please follow the steps below to process ID setting of the Wireless mouse.
The pairing button locates on the top of the receiver with a LED under to show the pairing or data reception status. The ID-recognition
function helps to protect against interference from other RF products in the same environment.
Remember to reset ID when other RF
products affect your mouse.
1.
Press the pairing button on top of the receiver first. Receiver LED will blink slowly indicating it’s ready to receive mouse pairing
information.
2.
Next, press the pairing button on the bottom of the mouse once.
3.
The dongle receiver LED will blink rapidly for some time to indicate it has received pairing information.
4.
When you move the mouse, the dongle receiver LED indicator will light steadily. When you stop using the mouse, the dongle
receiver LED indicator will stop lighting.
C
onnect Button
Power Switch
Note:
1.
Your PC must be turned on before doing this pairing procedure.
2.
You must follow the procedure above to complete ID pairing.
3.
The whole procedure should be completed within
60 seconds
.
4.
You don’t have to pair ID again after changing batteries. If it can’t work, please follow the steps above to process ID setting of
the optical mouse.
Driver Installation
USB Device Driver
The USB device driver is included in Windows operating system.
During initial installation of the USB device, the system will automatically detect a new hardware being added, and then bring up "Add
New Hardware Wizard" dialogue box. Please follow the Wizard's USB driver installation steps. Once this installation step is completed
the basic functions of the USB device will work under the operating system. The additional functions are provided only after the
MouseMaestro application is installed.
MouseMaestro Input Device Driver
1.
After you download the driver, please find the “SetupKey.exe” in the directory and double-click this file.
2.
Then follow the on-screen instruction to install the driver.
3.
The driver icon
will show at the right-bottom in the Windows system tray when the driver is loaded.
Pairing button on the top of the dongle receiver
(With LED indicator under the pairing button)
Pairing button on the bottom of the mouse
